View all Advantys FTB
I/O splitter box FTB monobloc - IP67 - for DeviceNet - 12I - 4OShow more characteristics
has not been replaced. Please contact your customer care center for more information.
The maximum number of products that can be compared is 4
Main range of productAdvantys FTB product or component typeIP67 monobloc I/O splitter box enclosure materialPlastic bus typeDeviceNet input/output number16 discrete input number8 discrete output number8 structure typeAccording to ISO 11898According to CAN, layer 7According to EN 50325 Complementary [Ue] rated operational voltage24 V DC maximum supply current8 A internal current consumption120 mA discrete input voltage24 V discrete input voltage typeDC maximum discrete input current200 mA discrete input logicPositive product compatibilityWith 2-wire/3-wire sensors discrete output voltage24 V discrete output voltage typeDC discrete output current1600 mA discrete output typeTransistor sensor power supply18…30 V reverse polarity protectionInternal switching frequency<= 20 Hz maximum tungsten load10 W electrical connection1 female connector 7/8" (power OUT)1 female connector M12 (bus OUT)1 male connector 7/8" (power IN)1 male connector M12 (bus IN)8 female connectors M12 (sensor or actuator) output connection cable size0.34 mm², cable length <5 m0.75 mm², cable length <10 m method of accessMaster/slave transmission rate500 kbit/s transmission support medium4 twisted shielded wires number of addresses1…63 input/output number of splitter box8 O + 8 diagnostic inputs output overvoltage protectionSuppressor diode protection typeShort-circuit protection input filtering1 ms control threshold undervoltage0…18 V status LED1 LEDactuator power supply diagnostics: 1 LEDsensor power supply diagnostics: 1 LED per channelchannel diagnostic: 1 LED per channelchannel status: 2 LEDsbus diagnostic: surge withstand-1 kV power supply (asymmetrical) conforming to IEC 61000-4-51 kV power supply (asymmetrical) conforming to IEC 61000-4-5-1 kV signal (asymmetrical) conforming to IEC 61000-4-51 kV signal (asymmetrical) conforming to IEC 61000-4-50.5 kV ground/PE conforming to IEC 61000-4-50.5 kV power supply (symmetrical) conforming to IEC 61000-4-50.5 kV signal (symmetrical) conforming to IEC 61000-4-5 operating positionAny position fixing modeBy 2 screws tightening torque1.5 N.m for M4 screw(s) net weight0.45 kg Environment standardsIEC 1131-2 Type 2 product certificationsCULus ambient air temperature for operation0…55 °C ambient air temperature for storage-25…70 °C IP degree of protectionIP67 conforming to IEC 60529 operating altitude0...2000 m vibration resistance0.35 mm constant amplitude (f= 10…57 Hz) conforming to IEC 68-2-6, FC test5 gn constant acceleration (f= 57…150 Hz) conforming to IEC 68-2-6, FC test shock resistance30 gn for 11 ms conforming to IEC 68-2-27, EA tests resistance to electrostatic discharge-4 kV in contact conforming to IEC 61000-4-24 kV in contact conforming to IEC 61000-4-2-8 kV in air conforming to IEC 61000-4-28 kV in air conforming to IEC 61000-4-2 resistance to radiated fields10 V/m conforming to IEC 61000-4-3 resistance to fast transients-2 kV (power supply) conforming to IEC 61000-4-42 kV (power supply) conforming to IEC 61000-4-4-2 kV (signal) conforming to IEC 61000-4-42 kV (signal) conforming to IEC 61000-4-4 resistance to conducted disturbances10 V conforming to IEC 61000-4-6 Contractual warranty Warranty18 months
User guideFormatSizeAdd to My DocumentsCADFormatSizeAdd to My Documentsprp.document.label.format zipSize 233.3 KBDate 11/28/07Files in documentprp.document.label.format zipSize 70.2 KBDate 11/28/07Files in document
- All Languages8
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.