Main range of productLexium integrated drive product or component typeMotion integrated drive device short nameILE motor typeBrushless dc motor number of motor poles6 network number of phasesSingle phase [Us] rated supply voltage48 V24 V network typeDC communication interfaceEthernet/IP, integrated length229 mm winding typeMedium speed of rotation and medium torque electrical connectionPrinted circuit board connector holding brakeWithout gear box typeWorm gear, 2 stages reduction ratio24:1 (525:22) nominal speed168 rpm at 24 V168 rpm at 48 V nominal torque3.8 N.m at 24 V3.8 N.m at 48 V Complementary transmission rate125, 250, 500 kbauds mounting supportFlange motor flange size66 mm number of motor stacks1 centring collar diameter36 mm number of mounting holes2 mounting holes diameter4.4 mm feedback typeBLDC encoder shaft endHole second shaftWithout second shaft end supply voltage limits18…55.2 V current consumption7000 mA peak5500 mA maximum continuous associated fuse rating16 A commissioning interfaceRS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds) input/output type4 signals (each be used as input or output) voltage state 0 guaranteed-3...4.5 V voltage state 1 guaranteed15...30 V discrete input current10 mA at 24 V on/STO_A for safety input3 mA at 24 V on/STO_B for safety input2 mA at 24 V for 24 V signal interface discrete output voltage23...25 V maximum switching current100 mA per output200 mA total protection typeSafe torque offShort circuit of the output voltageOverload of output voltage maximum supply current0.1 A (power stage disabled)6.8 A at 24 V3.8 A at 48 V nominal output power45 W at 24 V66 W at 48 V peak stall torque6.19 N.m at 24 V6.19 N.m at 48 V continuous stall torque4.2 N.m detent torque2.9 N.m speed feedback resolution12 points/turn motor1.26° gearbox output accuracy error+/- 1 point rotor inertia90 kg.cm² maximum mechanical speed186 rpm maximum radial force Fr200 N maximum axial force Fa80 N service life in hours3000 h bearing markingCE type of coolingNatural convection net weight2.3 kg Environment standardsEN 50347IEC 60072-1EN 61800-3 : 2001-02IEC 61800-3, Ed 2EN 61800-3:2001, second environmentEN/IEC 61800-3EN/IEC 50178 product certificationsCULULTÜV ambient air temperature for operation40…55 °C (with power derating of 2 % per °C)0…40 °C (without) permissible ambient air temperature around the device105 °C power amplifier110 °C motor ambient air temperature for storage-25…70 °C operating altitude<= 1000 m without relative humidity15…85 % without condensation vibration resistance20 m/s² (f= 10…500 Hz) 10 cycles conforming to EN/IEC 60068-2-6 shock resistance150 m/s² 1000 shocks conforming to EN/IEC 60068-2-29 IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5IP54 total except shaft bushing: conforming to EN/IEC 60034-5 Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsUser guideFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages11
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.