Main range of productLexium integrated drive product or component typeMotion integrated drive device short nameILP motor type2-phase stepper motor network typeDC electrical connectionIndustrial connector [Us] rated supply voltage24...48 V length88.39 mm winding typeMedium speed of rotation and medium torque gear box typeWithout nominal speed400 rpm at 24 V600 rpm at 48 V holding torque0.63 N.m Complementary communication interfaceRS485 transmission rate4.8, 9.6, 19.2, 38.4, 115 kbauds mounting supportFlange motor flange size57 mm feedback typeIndex pulse holding brakeWithout supply voltage limits12…48 V current consumption3.2 A maximum continuous input/output type11 signals (each be used as input or output) voltage state 0 guaranteed<= 0.8 V voltage state 1 guaranteed>= 2.2 V discrete input current1.75 mA at 24 V for 24 V signal interface maximum switching current275 mA four channels600 mA single channel protection typeShort circuit of the output voltageOverload of output voltage peak stall torque0.63 N.m continuous stall torque0.63 N.m speed feedback resolution1000 steps10000 steps12800 steps1600 steps200 steps2000 steps20000 steps25000 steps25600 steps3200 steps400 steps40000 steps5000 steps50000 steps51200 steps6400 steps800 steps accuracy error+/- 0.3 arc/min rotor inertia0.18 kg.cm² service life in hours20000 h markingCE net weight0.61 kg Environment standardsIEC 61000-4-6IEC 61000-4-4IEC 61000-4-11EN 55011:2007, A2:2007 for Group 1, Class AEN 61000-3-3:1995, A1:2001, A2:2005EN 61000-3-2 : 2006EMC immunity IEC 61000-4-2IEC 61000-4-3IEC 61000-4-5 ambient air temperature for operation50…65 °C (with power derating of 2 % per °C)0…50 °C (without) permissible ambient air temperature around the device100 °C ambient air temperature for storage-25…70 °C operating altitude<= 1000 m without relative humidity15…85 % without condensation IP degree of protectionIP41 shaft bushing: conforming to EN/IEC 60034-5IP54 total except shaft bushing: conforming to EN/IEC 60034-5 Contractual warranty Warranty18 months
- All Languages3
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsIntegrated Drive with Industrial ConnectorsDimensionsL88.39 mm/3.48 in.
Connections and SchemaConnection Example with 4 I/O Signals
Three sinking inputs (I/O4 - I/O2) and a sourcing output (I/O1).RRelay
Performance CurvesTorque CharacteristicsXSpeed of rotation in rpmYTorque in Nm