View all TeSys D
TeSys D contactor - 3P(3 NO) - AC-3 - <= 440 V 12 A - 48 V AC coilShow more characteristics
LC1D1265E7 has not been replaced. Please contact your customer care center for more information.
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main rangeTeSys product nameTeSys D product or component typeContactor device short nameLC1D contactor applicationMotor controlResistive load utilisation categoryAC-3AC-1 poles description3P power pole contact composition3 NO [Ue] rated operational voltagePower circuit: <= 690 V AC 25...400 HzPower circuit: <= 300 V DC [Ie] rated operational current25 A (at <60 °C) at <= 440 V AC AC-1for power circuit12 A (at <60 °C) at <= 440 V AC AC-3for power circuit motor power kW3 kW at 220...230 V AC 50/60 Hz5.5 kW at 380...400 V AC 50/60 Hz5.5 kW at 415...440 V AC 50/60 Hz7.5 kW at 500 V AC 50/60 Hz7.5 kW at 660...690 V AC 50/60 Hz motor power HP (UL / CSA)0.5 hp at 115 V AC 50/60 Hz for 1 phase motors2 hp at 230/240 V AC 50/60 Hz for 1 phase motors3 hp at 200/208 V AC 50/60 Hz for 3 phases motors3 hp at 230/240 V AC 50/60 Hz for 3 phases motors7.5 hp at 460/480 V AC 50/60 Hz for 3 phases motors10 hp at 575/600 V AC 50/60 Hz for 3 phases motors control circuit typeAC at 50/60 Hz [Uc] control circuit voltage48 V AC 50/60 Hz auxiliary contact composition1 NO + 1 NC [Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947 overvoltage categoryIII [Ith] conventional free air thermal current25 A (at 60 °C)for power circuit10 A (at 60 °C)for signalling circuit Irms rated making capacity250 A at 440 Vfor power circuit conforming to IEC 60947140 A ACfor signalling circuit conforming to IEC 60947-5-1250 A DCfor signalling circuit conforming to IEC 60947-5-1 rated breaking capacity250 A at 440 Vfor power circuit conforming to IEC 60947 [Icw] rated short-time withstand current105 A 40 °C - 10 sfor power circuit210 A 40 °C - 1 sfor power circuit30 A 40 °C - 10 minfor power circuit61 A 40 °C - 1 minfor power circuit100 A - 1 sfor signalling circuit120 A - 500 msfor signalling circuit140 A - 100 msfor signalling circuit associated fuse rating10 A gGfor signalling circuit conforming to IEC 60947-5-140 A gG at <= 690 V coordination type 1for power circuit25 A gG at <= 690 V coordination type 2for power circuit average impedance2.5 mOhm - Ith 25 A 50 Hzfor power circuit [Ui] rated insulation voltagePower circuit: 690 V conforming to IEC 60947-4-1Power circuit: 600 V CSA certifiedPower circuit: 600 V UL certifiedSignalling circuit: 690 V conforming to IEC 60947-1Signalling circuit: 600 V CSA certifiedSignalling circuit: 600 V UL certified electrical durability2 Mcycles 12 A AC-3 at Ue <= 440 V0.8 Mcycles 25 A AC-1 at Ue <= 440 V power dissipation per pole0.36 W AC-31.56 W AC-1 safety coverWithout mounting supportPlateRail standardsCSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508 product certificationsLROS (Lloyds register of shipping)GOSTBVULCSADNVGLCCCRINA connections - terminalsControl circuit: lugs-ring terminals (external diameter: 8 mm) Power circuit: lugs-ring terminals (external diameter: 8 mm) tightening torqueControl circuit: 1.7 N.m - on lugs-ring terminals - with screwdriver flat Ø 6 mm M3.5Control circuit: 1.7 N.m - on lugs-ring terminals - with screwdriver Philips No 2 M3.5Power circuit: 1.7 N.m - on lugs-ring terminals - with screwdriver flat Ø 8 mm M3.5Power circuit: 1.7 N.m - on lugs-ring terminals - with screwdriver Philips No 2 M3.5 operating time12...22 ms closing4...19 ms opening safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 mechanical durability15 Mcycles maximum operating rate3600 cyc/h 60 °C Complementary coil technologyWithout built-in suppressor module control circuit voltage limitsDrop-out: 0.3...0.6 Uc AC 50/60 Hz (at 60 °C)Operational: 0.8...1.1 Uc AC 50 Hz (at 60 °C)Operational: 0.85...1.1 Uc AC 60 Hz (at 60 °C) inrush power in VA70 VA 60 Hz cos phi 0.75 (at 20 °C)70 VA 50 Hz cos phi 0.75 (at 20 °C) hold-in power consumption in VA7.5 VA 60 Hz cos phi 0.3 (at 20 °C)7 VA 50 Hz cos phi 0.3 (at 20 °C) heat dissipation2…3 W at 50/60 Hz auxiliary contacts typetype mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1 signalling circuit frequency25...400 Hz minimum switching current5 mAfor signalling circuit minimum switching voltage17 Vfor signalling circuit non-overlap time1.5 ms on de-energisation between NC and NO contact1.5 ms on energisation between NC and NO contact insulation resistance> 10 MOhmfor signalling circuit Environment IP degree of protectionIP20 front face conforming to IEC 60529 protective treatmentTH conforming to IEC 60068-2-30 pollution degree3 ambient air temperature for operation-5…60 °C ambient air temperature for storage-60…80 °C permissible ambient air temperature around the device-40…70 °C at Uc operating altitude3000 m without derating fire resistance850 °C conforming to IEC 60695-2-1 flame retardanceV1 conforming to UL 94 mechanical robustnessVibrations contactor open: 2 Gn, 5...300 HzVibrations contactor closed: 4 Gn, 5...300 HzShocks contactor open: 10 Gn for 11 msShocks contactor closed: 15 Gn for 11 ms height77 mm width45 mm depth84 mm net weight0.325 kg Contractual warranty Warranty18 months
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.