Main rangeTeSys product nameTeSys D product or component typeContactor device short nameLC1D contactor applicationResistive load utilisation categoryAC-1 poles description4P power pole contact composition2 NO + 2 NC [Ue] rated operational voltagePower circuit: <= 300 V DC 25...400 HzPower circuit: <= 690 V AC [Ie] rated operational current125 A (at <60 °C) at <= 440 V AC AC-1 for power circuit control circuit typeAC at 50/60 Hz [Uc] control circuit voltage115 V AC 50/60 Hz [Uimp] rated impulse withstand voltage8 kV conforming to IEC 60947 overvoltage categoryIII [Ith] conventional free air thermal current125 A (at 60 °C) for power circuit Irms rated making capacity1100 A at 440 V for power circuit conforming to IEC 60947 rated breaking capacity1100 A at 440 V for power circuit conforming to IEC 60947 [Icw] rated short-time withstand current640 A 40 °C - 10 s for power circuit990 A 40 °C - 1 s for power circuit135 A 40 °C - 10 min for power circuit320 A 40 °C - 1 min for power circuit associated fuse rating200 A gG at <= 690 V coordination type 1 for power circuit160 A gG at <= 690 V coordination type 2 for power circuit average impedance0.8 mOhm - Ith 125 A 50 Hz for power circuit [Ui] rated insulation voltagePower circuit: 600 V CSA certifiedPower circuit: 600 V UL certifiedPower circuit: 1000 V conforming to IEC 60947-4-1 electrical durability0.8 Mcycles 125 A AC-1 at Ue <= 440 V power dissipation per pole12.5 W AC-1 Front coverWithout mounting supportRailPlate standardsCSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508 product certificationsCSAGLBVCCCULRINADNVLROS (Lloyds register of shipping)GOST connections - terminalsControl circuit: screw clamp terminals 2 cable(s) 1…2.5 mm²flexible with cable endControl circuit: screw clamp terminals 1 cable(s) 1…2.5 mm²flexible with cable endControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²flexible without cable endControl circuit: screw clamp terminals 2 cable(s) 1…4 mm²flexible without cable endControl circuit: screw clamp terminals 1 cable(s) 1…4 mm²solid without cable endControl circuit: screw clamp terminals 2 cable(s) 1…4 mm²solid without cable endPower circuit: connector 1 cable(s) 4…50 mm²flexible without cable endPower circuit: connector 2 cable(s) 4…25 mm²flexible without cable endPower circuit: connector 1 cable(s) 4…50 mm²flexible with cable endPower circuit: connector 2 cable(s) 4…16 mm²flexible with cable endPower circuit: connector 1 cable(s) 4…50 mm²solid without cable endPower circuit: connector 2 cable(s) 4…25 mm²solid without cable end tightening torqueControl circuit: 1.2 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mmControl circuit: 1.2 N.m - on screw clamp terminals - with screwdriver Philips No 2Power circuit: 9 N.m - on connector - with screwdriver flat Ø 6 to Ø 8 mmPower circuit: 9 N.m - on connector hexagonal screw head 4 mm operating time20...35 ms closing6...20 ms opening safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 mechanical durability4 Mcycles maximum operating rate3600 cyc/h 60 °C Complementary coil technologyWithout built-in suppressor module inrush power in VA245 VA 60 Hz cos phi 0.75 (at 20 °C)245 VA 50 Hz cos phi 0.75 (at 20 °C) hold-in power consumption in VA26 VA 60 Hz cos phi 0.3 (at 20 °C)26 VA 50 Hz cos phi 0.3 (at 20 °C) heat dissipation6…10 W at 50/60 Hz contact compatibilityM1 compatibility codeLC1D Environment IP degree of protectionIP20 front face conforming to IEC 60529 protective treatmentTH conforming to IEC 60068-2-30 pollution degree3 ambient air temperature for storage-60…80 °C operating altitude3000 m without derating fire resistance850 °C conforming to IEC 60695-2-1 flame retardanceV1 conforming to UL 94 mechanical robustnessVibrations contactor open: 2 Gn, 5...300 HzShocks contactor open: 8 Gn for 11 msVibrations contactor closed: 3 Gn, 5...300 HzShocks contactor closed: 10 Gn for 11 ms height127 mm width96 mm depth140 mm net weight1.84 kg Packing Units Unit Type of Package 1PCE Number of Units in Package 11 Package 1 Weight1.842 kg Package 1 Height15.5 cm Package 1 width11 cm Package 1 Length13.5 cm Offer Sustainability Sustainable offer statusGreen Premium product REACh free of SVHCYes EU RoHS DirectiveCompliant
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS RegulationChina RoHS declaration
Pro-active China RoHS declaration (out of China RoHS legal scope)
Environmental Disclosure WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins PVC freeYes Contractual warranty Warranty18 months
CatalogueFormatSizeDateAdd to My Documentsprp.document.label.format pdfSize 118.2 MBDate 7/22/20DescriptionReady-to-use motor starters and all components for building specific motor starters ( circuit breakers, contactors, overload relays , accessories ...). This edition includes a presentation of the new TeSys island system. The catalogue can also be downloaded chapter per chapter.prp.document.label.format pdfSize 16.1 MBDate 7/22/20DescriptionContactors : TeSys D.Mini contactors, pre cabled reversing contactors : TeSys SK, KModular (on DIN rail) contactors, dual tariif contactors, impulse relays :TeSys SKGC, GC, GY, GFAccessoriesCADFormatSizeDateAdd to My DocumentsCertificateFormatSizeDateAdd to My DocumentsChina RoHS declarationFormatSizeDateAdd to My DocumentsDeclaration of conformityFormatSizeDateAdd to My DocumentsEU RoHS DeclarationFormatSizeDateAdd to My Documents
- All Languages11
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.