Main rangeTeSys product nameTeSys D product or component typeReversing contactor device short nameLC2D contactor applicationResistive loadMotor control utilisation categoryAC-1AC-3 device presentationPreassembled with reversing power busbar poles description3P power pole contact composition3 NO [Ue] rated operational voltagePower circuit: <= 690 V AC 25...400 HzPower circuit: <= 300 V DC [Ie] rated operational current9 A (at <60 °C) at <= 440 V AC AC-3 for power circuit16 A (at <60 °C) at <= 440 V AC AC-1 for power circuit motor power kW2.2 kW at 220...230 V AC 50 Hz4 kW at 380...400 V AC 50 Hz4 kW at 415...440 V AC 50 Hz5.5 kW at 500 V AC 50 Hz5.5 kW at 660...690 V AC 50 Hz motor power HP (UL / CSA)0.5 hp at 115 V AC 60 Hz for 1 phase motors1 hp at 230/240 V AC 60 Hz for 1 phase motors2 hp at 200/208 V AC 60 Hz for 3 phases motors2 hp at 230/240 V AC 60 Hz for 3 phases motors5 hp at 460/480 V AC 60 Hz for 3 phases motors7.5 hp at 575/600 V AC 60 Hz for 3 phases motors control circuit typeDC low consumption [Uc] control circuit voltage24 V DC auxiliary contact composition1 NO + 1 NC [Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947 overvoltage categoryIII [Ith] conventional free air thermal current16 A (at 60 °C) for power circuit10 A (at 60 °C) for signalling circuit Irms rated making capacity250 A at 440 V for power circuit conforming to IEC 60947140 A AC for signalling circuit conforming to IEC 60947-5-1250 A DC for signalling circuit conforming to IEC 60947-5-1 rated breaking capacity250 A at 440 V for power circuit conforming to IEC 60947 [Icw] rated short-time withstand current30 A 40 °C - 10 min for power circuit61 A 40 °C - 1 min for power circuit105 A 40 °C - 10 s for power circuit210 A 40 °C - 1 s for power circuit100 A - 1 s for signalling circuit120 A - 500 ms for signalling circuit140 A - 100 ms for signalling circuit associated fuse rating25 A gG at <= 690 V coordination type 1 for power circuit20 A gG at <= 690 V coordination type 2 for power circuit10 A gG for signalling circuit conforming to IEC 60947-5-1 average impedance2.5 mOhm - Ith 16 A 50 Hz for power circuit [Ui] rated insulation voltagePower circuit: 690 V conforming to IEC 60947-4-1Power circuit: 600 V CSA certifiedPower circuit: 600 V UL certifiedSignalling circuit: 690 V conforming to IEC 60947-1Signalling circuit: 600 V CSA certifiedSignalling circuit: 600 V UL certified electrical durability0.6 Mcycles 25 A AC-1 at Ue <= 440 V2 Mcycles 9 A AC-3 at Ue <= 440 V power dissipation per pole0.2 W AC-31.56 W AC-1 Front coverWith interlocking typeMechanical mounting supportPlateRail standardsCSA C22.2 No 14EN 60947-4-1EN 60947-5-1IEC 60947-4-1IEC 60947-5-1UL 508 product certificationsDNVGLLROS (Lloyds register of shipping)BVCCCCSAULRINAGOST connections - terminalsPower circuit: spring terminals 1 cable(s) 2.5 mm²flexible without cable endPower circuit: spring terminals 2 cable(s) 2.5 mm²flexible without cable endControl circuit: spring terminals 1 cable(s) 2.5 mm²flexible without cable endControl circuit: spring terminals 2 cable(s) 2.5 mm²flexible without cable end operating time65.45...88.55 ms closing20...30 ms opening safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 mechanical durability30 Mcycles maximum operating rate3600 cyc/h 60 °C Complementary coil technologyBuilt-in bidirectional peak limiting diode suppressor control circuit voltage limitsDrop-out: 0.1...0.3 Uc DC (at 60 °C)Operational: 0.8...1.25 Uc DC (at 60 °C) time constant40 ms inrush power in W2.4 W (at 20 °C) hold-in power consumption in W2.4 W at 20 °C auxiliary contacts typetype mechanically linked 1 NO + 1 NC conforming to IEC 60947-5-1 type mirror contact 1 NC conforming to IEC 60947-4-1 signalling circuit frequency25...400 Hz minimum switching current5 mA for signalling circuit minimum switching voltage17 V for signalling circuit non-overlap time1.5 ms on de-energisation between NC and NO contact1.5 ms on energisation between NC and NO contact insulation resistance> 10 MOhm for signalling circuit Environment IP degree of protectionIP20 front face conforming to IEC 60529 protective treatmentTH conforming to IEC 60068-2-30 pollution degree3 ambient air temperature for operation-20…60 °C ambient air temperature for storage-60…80 °C permissible ambient air temperature around the device-40…70 °C at Uc operating altitude3000 m without derating fire resistance850 °C conforming to IEC 60695-2-1 flame retardanceV1 conforming to UL 94 mechanical robustnessVibrations contactor open: 2 Gn, 5...300 HzVibrations contactor closed: 4 Gn, 5...300 HzShocks contactor open: 10 Gn for 11 msShocks contactor closed: 15 Gn for 11 ms height99 mm width90 mm depth95 mm net weight1.017 kg Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation REACh free of SVHCYes EU RoHS DirectiveCompliant
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My Documentsprp.document.label.format pdfSize 111.5 MBDate 7/12/19DescriptionReady-to-use motor starters and all components for building specific motor starters ( circuit breakers, contactors, overload relays , accessories ...).The catalogue can also be downloaded chapter per chapter.CADFormatSizeAdd to My DocumentsCertificateFormatSizeAdd to My DocumentsInstruction sheetFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages14
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.