LP5K090047SW3

TeSys

TeSys K

Changeover contactor

LP5K

Control

Resistive load

AC-1

Preassembled with reversing power busbar

4P

4 NO

Power circuit: 690 V AC 50/60 Hz

20 A (at <50 °C) at <= 440 V AC AC-1 for power circuit
16 A (at <70 °C) at 690 V AC AC-1 for power circuit

DC low consumption

72 V DC

8 kV

III

20 A (at 50 °C) for power circuit

110 A AC for power circuit conforming to NF C 63-110
110 A AC for power circuit conforming to IEC 60947

110 A at 415 V conforming to IEC 60947
110 A at 440 V conforming to IEC 60947
80 A at 500 V conforming to IEC 60947
110 A at 220...230 V conforming to IEC 60947
110 A at 380...400 V conforming to IEC 60947
70 A at 660...690 V conforming to IEC 60947

90 A 50 °C - 1 s for power circuit
85 A 50 °C - 5 s for power circuit
80 A 50 °C - 10 s for power circuit
60 A 50 °C - 30 s for power circuit
45 A 50 °C - 1 min for power circuit
40 A 50 °C - 3 min for power circuit
20 A 50 °C - >= 15 min for power circuit

25 A gG at <= 440 V for power circuit
25 A aM for power circuit

3 mOhm - Ith 20 A 50 Hz for power circuit

Power circuit: 600 V conforming to UL 508
Power circuit: 690 V conforming to IEC 60947-4-1
Power circuit: 600 V conforming to CSA C22.2 No 14

0.18 Mcycles 20 A AC-1 at Ue <= 440 V

Mechanical

Plate
Rail

NF C 63-110
IEC 60947
BS 5424
VDE 0660

UL
CSA

Faston terminals 2 cable(s) - busbar cross section: 2.8 mm
Faston terminals 1 cable(s) - busbar cross section: 6.35 mm

10...20 ms coil de-energisation and NO opening
30...40 ms coil energisation and NO closing

B10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1
B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1

5 Mcycles

3600 cyc/h

Built-in bidirectional peak limiting diode suppressor

Operational: 0.7...1.30 Uc (at <50 °C)
Drop-out: 0.1...0.7 Uc (at <50 °C)

1.8 W (at 20 °C)

1.8 W at 20 °C

1.8 W

IP20 conforming to VDE 0106

TC conforming to IEC 60068
TC conforming to DIN 50016

-25…50 °C

-50…80 °C

2000 m without

V1 conforming to UL 94
Requirement 2 conforming to NF F 16-101
Requirement 2 conforming to NF F 16-102

Shocks contactor closed, on Z axis: 15 Gn for 11 ms conforming to IEC 60068-2-27
Shocks contactor opened, on Z axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Vibrations contactor closed: 4 Gn, 5...300 Hz conforming to IEC 60068-2-6
Vibrations contactor opened: 2 Gn, 5...300 Hz conforming to IEC 60068-2-6
Shocks contactor opened, on X axis: 10 Gn for 11 ms conforming to IEC 60068-2-27
Shocks contactor opened, on Y axis: 6 Gn for 11 ms conforming to IEC 60068-2-27
Shocks contactor closed, on X axis: 15 Gn for 11 ms conforming to IEC 60068-2-27
Shocks contactor closed, on Y axis: 10 Gn for 11 ms conforming to IEC 60068-2-27

58 mm

90 mm

57 mm

0.49 kg

18 months