Main rangePowerLogic device short nameION92030 product or component typeEnergy and power quality meter device applicationPower monitoringWAGES meteringNet meteringMedium voltageHigh voltage metering typeDemand current I1, I2, I3, I4, I5Peak demand currentsDemand power P, Q, SPeak demand power PM, QM, SMCalculated active and reactive energy (+/- W.h, +/- VAR.h) Complementary power quality analysisEN 50160 compliance checking conforming to IEEE 519 harmonic limit conforming to IEC 61000-4-30: class A compliance reporting conforming to IEEE 519 compliance reporting waveform capture total demand distortion total harmonic distortion up to the 63rd harmonic up to the 127th harmonic with software disturbance direction detection dip, swell and transient half cycle data acquisition transient detection (20 µs) type of measurementVoltage sags and swellsCurrent sags and swellsVoltageCurrentFrequencyActive and reactive power totalApparent power totalActive and reactive power per phaseApparent power per phasePower factor totalPower factor per phaseActive and reactive energyApparent energyHarmonic distorsion (I THD & U THD) [Us] rated supply voltage90...480 V AC 45...66 Hz +/- 10 %90...120 V AC 400 Hz +/- 10 %110...480 V DC +/- 15 % network frequency50 Hz60 Hz ride-through time100 ms 6 cycles at 60 Hz 120 V AC typical400 ms 24 cycles at 60 Hz 240 V AC typical1200 ms 72 cycles at 60 Hz 480 V AC typical [In] rated current1 A5 A20 A type of network3P + N + E power consumption in VA38 VA at 480 V AC maximum power consumption in VA80 VA at 480 V AC display typeWithout display sampling rate1024 samples/cycle measurement current0.01…20 A input typeVoltage (impedance 5 MOhm)Current (impedance 0.3 mOhm)5 x measurement voltage57…400 V AC 42...69 Hz between phase and neutral100…690 V AC 42...69 Hz between phases frequency measurement range20…450 Hz number of inputs8 digital 30 V AC/60 V DC measurement accuracyVoltage +/- 0.1 %Current +/- 0.1 % accuracy classClass 0.1S active energy conforming to IEC 62053-22Class 0.1 active energy conforming to IEC 61557-12Class 0.1 active energy conforming to ANSI C12.20Class 0.5S reactive energy conforming to IEC 62053-24Class 0.1 current conforming to IEC 61557-12Class 0.1 voltage conforming to IEC 61557-12Class 0.1 active power conforming to IEC 61557-12Class 0.5 power factor conforming to IEC 61557-12 number of outputs4 digital2 form C relay communication port protocolModbus RTU at 2400...115200 bps - 2-wireION at 2400...115200 bps - 2-wireDNP3 at 2400...115200 bps - 2-wireModbus TCP at 10/100 Mbit/sION TCP at 10/100 Mbit/sDNP3 TCP at 10/100 Mbit/sIEC 61850Ethernet Modbus TCP/IP daisy chain at 10/100 Mbit/sDHCPDNSDLMS communication port supportRS485 2 removable screw terminal block port Ethernet10/100BASE-TX 2 RJ45 communication gatewayEthernet/serial time synchronisation protocolGPSIRIG-BNTPSNTPPTP data recordingTime stampingMin/max of instantaneous valuesUser-definable data logsContinuous logging or snapshotTrending/forecastingEvent logsAlarm logsConfiguration changePower outageUser login/logoutData logsGPS synchronisationSequence of event recording memory capacity2 GB cybersecuritySyslog protocol supportRobust security logsPort hardeningEnable/disable communication portsHardware metrology lock web servicesViewing of captured waveformWeb pagePass/fail report for IEEE 519Pass/fail report for EN 50160ITIC (CBEMA) curveSEMI curveNEMA motor derating curveAlarm notification by e-mailTLS 1.2Push historical data via mail Ethernet serviceDHCP clientDevice Profile Web Services (DPWS)Rapid Scanning Tree Protocol (RSTP)FTP/HTTP/HTTPS communication serviceCompliant reportsPower quality summaryEnergy reportEcoStruxure Power Events AnalysisSMTP e-mail notificationSNMP tamperproof of settingsProtected by sealable cover mounting supportDIN rail electrical insulation classClass III conforming to EN/IEC 62052-11 isolation voltageIII, 400…690 V conforming to EN 61010-1:ed. 3III, 347…600 V conforming to UL 61010-1:ed. 3III, 347…600 V conforming to CSA C22.2 No 61010-1:ed. 3 width160 mm depth135.3 mm height160 mm net weight1.5 kg Environment electromagnetic compatibilityEMC immunity conforming to IEC 62052-11EMC immunity conforming to IEC 61326-1EMC immunity conforming to IEC 61000-6-5Electrostatic discharge immunity test conforming to IEC 61000-4-2Immunity to radiated fields conforming to IEC 61000-4-3Immunity to fast transients conforming to IEC 61000-4-4Surge immunity test conforming to IEC 61000-4-5Immunity to conducted disturbances conforming to IEC 61000-4-6Immunity to magnetic fields at network frequency conforming to IEC 61000-4-8Immunity to conducted disturbances - test level: 2...150 kHz conforming to CLC/TR 50579Voltage dips and interruptions immunity test conforming to IEC 61000-4-11Immunity to impulse waves conforming to IEC 61000-4-12Conducted and radiated emissions conforming to EN 55011Conducted and radiated emissions class B conforming to EN 55032Conducted and radiated emissions class B conforming to FCC part 15Conducted and radiated emissions class B conforming to ICES-003Surge withstand conforming to ANSI C37.90.1Surge withstand conforming to IEEE C37.90.1 IP degree of protectionIP65 front: IP30 rear: degree of protectionUL type 12, front relative humidity5…95 % ambient air temperature for operation-25…70 °C ambient air temperature for storage-40…85 °C installation categoryIII operating altitude0...3000 m standardsANSI C12.20ANSI C37.90.1IEC 61000-4-15IEC 61000-4-30IEC 61010-1IEC 61326-1IEC 61557-12IEC 61850IEC 62052-11IEC 62052-31IEC 62053-22IEC 62053-23IEC 62053-24IEC 62586UL 61010-1 quality labelsISO 9001ISO 14000 Packing Units Unit Type of Package 1PCE Number of Units in Package 11 Package 1 Weight2.5 kg Package 1 Height30 cm Package 1 width30 cm Package 1 Length41 cm Offer Sustainability Sustainable offer statusGreen Premium product EU RoHS DirectiveCompliant
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
CatalogueFormatSizeAdd to My DocumentsUser guideFormatSizeAdd to My Documentsprp.document.label.format pdfSize 9.6 MBDate 1/1/20DescriptionOverview of ION architecture and details of all ION modulesprp.document.label.format pdfSize 13.9 MBDate 11/1/19DescriptionThis document explains how to configure and operate ION9000 meters.prp.document.label.format pdfSize 167.3 KBDate 11/1/19DescriptionThis document describes the process to upgrade RD96 display firmware to the latest version for use with PowerLogic™ ION9000, PM8000 or ION7400 series meters.prp.document.label.format pdfSize 95.2 KBDate 11/1/19DescriptionThis update provides a summary of technological advances in the Power and Energy Monitoring System offers, and the technical documentation accompanying their release.prp.document.label.format pdfSize 947.6 KBDate 11/1/19DescriptionThis document describes the process to upgrade PowerLogic™ ION9000, PM8000 or ION7400 series meters to the latest firmware version. It also contains information about upgrading analog I/O option module firmware.prp.document.label.format pdfSize 112.4 KBDate 9/1/19DescriptionThis technical note outlines the compliance of applicable PowerLogic meters with the International Electrotechnical Commission’s IEC 61000-4-30 (or “4-30”) standard, and is intended for personnelwith knowledge of power quality and power quality standards.prp.document.label.format pdfSize 147.4 KBDate 7/1/19DescriptionThis protocol document provides setup instructions for using DLMS/COSEM withPowerLogic ION8650 (firmware v406 and later), ION7400 (firmware v1.4.1 andlater) and ION8800 (firmware v350 and later) meters.prp.document.label.format pdfSize 84.1 KBDate 2/1/19DescriptionION9000 firmware version 2.1.0 updates: 0-20 mA Analog I/O option module support, UPG to UPX firmware upgrade enhancementInstruction sheetFormatSizeAdd to My Documentsprp.document.label.format pdfSize 14.8 MBDate 10/1/19DescriptionInstallation sheet for PowerLogic ION9000 power and energy meters describes mounting, wiring, connecting and verifying operation of the meter.China RoHS declarationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My Documents
- All Languages18
Software and FirmwareLanguage
FirmwareFormatSizeAdd to My Documentsprp.document.label.format zipSize 19.9 MBDate 11/20/19Files in documentzip18.8 MB942.2 KB161.9 KBDescriptionThis ZIP file contains the files to upgrade the PowerLogic™ ION9000 series meter to firmware v2.2.1 (V002.002.001), Meter Template, Modbus Map document, SNMP MIB, Webpages, What’s new document and other associated files. See the Upgrading Meter Firmware to v2.2.1 document for important information on performing this upgrade. Verify the checksum of the file to help ensure it was not corrupted during download using the SHA-256 File Signature for the ION9000_V002.002.001.zip file: 5fe6c4c69d5c427c01d2f32dad2339838eb306219f30fe7e7ea7847fa4a1192b. NOTE: To apply this firmware, the meter must have firmware v2.1.0. Go to schneider-electric.com and search for Upgrade devices to firmware v 2.1.0 and follow instructions on how to get and apply firmware v2.1.0.