Main rangeEasyLogic product nameEasyLogic PM2100 device short namePM2110 product or component typePower meter Complementary device applicationPower monitoringSub billing power quality analysistotal harmonic distortion type of measurementTotal current harmonic distortion THD (I) per phaseTotal voltage harmonic distortion THD (U) per phaseApparent energy totalActive and reactive energy totalApparent power totalActive and reactive power totalCurrent averageVoltage averageFrequency averagePower factor average metering typePeak demand power PM, QM, SMApparent power S, S1, S2, S3Current I, I1, I2, I3Reactive power Q, Q1, Q2, Q3Calculated neutral currentVoltage U, U21, U32, U13, V, V1, V2, V3Peak demand currentsUnbalance currentDemand power P, Q, SActive power P, P1, P2, P3Active, reactive, apparent energy (signed, four quadrant) accuracy classClass 1 active energy conforming to IEC 62053-21Class 1 reactive energy conforming to IEC 62053-24 measurement accuracyApparent power +/- 1 %Active energy +/- 1 %Reactive energy +/- 1 %Active power +/- 1 %Voltage +/- 0.5 %Power factor +/- 0.01Current +/- 0.5 %Frequency +/- 0.05 % measurement current5…6000 mA measurement voltage35…480 V AC 50/60 Hz between phases20…277 V AC 50/60 Hz between phase and neutral480…999000 V AC 50/60 Hz with external VT frequency measurement range45…65 Hz [Us] rated supply voltage44...277 V AC 45...65 Hz +/- 10 %44...277 V DC +/- 10 % network frequency60 Hz50 Hz ride-through time100 ms 120 V AC typical400 ms 230 V AC typical50 ms 125 V DC typical [In] rated current5 A1 A maximum power consumption in VA6 VA at 277 V AC maximum power consumption in W3.3 W (power lines (AC))2 W at 277 V (power lines (DC)) input impedanceCurrent (impedance <= 0.3 mOhm)Voltage (impedance > 5 MOhm) tamperproof of settingsProtected by access code display type7 segments LED display colourRed messages display capacity3 fields of 4 characters display digits12 digit(s) - 14.2 mm in height Demand intervalsConfigurable from 1 to 60 min information displayedDemand current (past value)Demand current (present value)Demand power (past value)Demand power (present value)VoltageCurrentFrequencyEnergy consumptionHarmonic distortionPower factorActive powerApparent powerReactive powerUnbalanced in % control type3 x button local signallingRed LED: output signal 1...9999000 pulse/ k_h (kWh, kVAh, kVARh)Green LED: module operating (RUN) number of inputs0 number of outputs1 pulse POP parameterPulse: 20 ms (5...40 V DC, 20 mA max)1...9999000 pulse/ k_h (kWh, kVAh, kVARh) impulse duration20 ms communication port protocolPOP sampling rate64 samples/cycle cybersecurityEnable/disable communication ports communication serviceRemote monitoring product certificationsCE conforming to IEC 61010-1CULus conforming to UL 61010-1CULus conforming to CSA C22.2 No 61010-1RCMEACC-Tick mounting modeClip-on mounting positionVertical mounting supportFramework provided equipment1 x installation guide measurement categoryCategory III 480 VCategory II 480…600 V electrical insulation classDouble insulationClass II flame retardanceV-0 conforming to UL 94 connections - terminalsCurrent transformer: screw connection (bottom) 6Voltage inputs: screw connection (top) 4 materialPolycarbonate width96 mm depth76.09 mm total: 61.64 mm embedded: height96 mm net weight300 g compatibility codePM2110 Environment service life7 year(s) IP degree of protectionIP54 front: conforming to IEC 60529IP30 body: conforming to IEC 60529 relative humidity5…95 % at 50 °C pollution degree2 ambient air temperature for operation-10…60 °C ambient air temperature for storage-25…70 °C operating altitude<= 2000 m electromagnetic compatibilityElectrostatic discharge conforming to IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3Electrical fast transient/burst immunity test conforming to IEC 61000-4-4Surge immunity test conforming to IEC 61000-4-5Conducted RF disturbances conforming to IEC 61000-4-6Magnetic field at power frequency conforming to IEC 61000-4-8Voltage dips and interruptions immunity test conforming to IEC 61000-4-11Emission tests conforming to FCC part 15 class A overvoltage categoryIII Offer Sustainability REACh Regulation REACh free of SVHCYes EU RoHS DirectiveCompliant
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
CatalogueFormatSizeAdd to My DocumentsUser guideFormatSizeAdd to My DocumentsBrochureFormatSizeAdd to My DocumentsInstruction sheetFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My DocumentsREACh DeclarationFormatSizeAdd to My DocumentsRoHs China DeclarationFormatSizeAdd to My Documents
- All Languages14
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.