Main range of productZelio Time product or component typeModular timing relay discrete output typeRelay device short nameRE22 nominal output current8 A Complementary contacts type and composition2 C/O timed contact time delay typeAtA time delay range1...10 min10...100 h1...10 s0.1...1 s6...60 s6...60 min1...10 h control typeRotary knob front panel [Us] rated supply voltage24...240 V AC24 V DC voltage range0.85...1.1 Us supply frequency50...60 Hz +/- 5 % connections - terminalsScrew terminals, 2 x 1.5 mm² with cable endScrew terminals, 2 x 2.5 mm² without cable end tightening torque0.6…1 N.m conforming to IEC 60947-1 housing materialSelf-extinguishing repeat accuracy+/- 0.5 % conforming to IEC 61812-1 temperature drift+/- 0.05 %/°C voltage drift+/- 0.2 %/V setting accuracy of time delay+/- 10 % of full scale at 25 °C conforming to IEC 61812-1 Control signal pulse width30 ms100 ms under load insulation resistance100 MOhm at 500 V DC conforming to IEC 60664-1 Recovery time120 ms on de-energisation immunity to microbreaks10 ms power consumption in VA50 VA at 240 V AC power consumption in W0.7 W at 24 V DC breaking capacity2000 VA minimum switching current10 mA at 5 V maximum switching current8 mA maximum switching voltage250 V electrical durability100000 cycles for resistive load, 8 A at 250 V, AC mechanical durability10000000 cycles Rated impulse withstand voltage5 kV for 1.2…50 µs conforming to IEC 60664-15 kV conforming to IEC 61812-1 Power on delay100 ms safety reliability dataMTTFd = 182.6 yearsB10d = 170000 mounting positionAny position in relation to normal vertical mounting plane mounting support35 mm DIN rail conforming to EN/IEC 60715 status LEDLED green (flashing) for timing in progressLED green (steady) for power ONLED yellow for relay energised width22.5 mm net weight0.09 kg Environment dielectric strength2.5 kV for 1 mA/1 minute at 50 Hz conforming to IEC 61812-1 standardsEN 61000-6-3EN 61000-6-4EN 61000-6-2IEC 61812-1EN 61000-6-1 directives2004/108/EC - electromagnetic compatibility2006/95/EC - low voltage directive product certificationsCULusCEEACCSARCMCCCChina RoHSGL ambient air temperature for operation-20…60 °C ambient air temperature for storage-30…60 °C IP degree of protectionIP40 housing: conforming to IEC 60529IP20 terminal block: conforming to IEC 60529IP40 front face: conforming to IEC 60529 vibration resistance20 m/s² (f= 10…150 Hz) conforming to IEC 60068-2-6 shock resistance15 gn for 11 ms conforming to IEC 60068-2-27 relative humidity93 %, without condensation conforming to IEC 60068-2-30 electromagnetic compatibilityElectrostatic discharge immunity test - test level: 6 kV level 3 (contact discharge) conforming to EN/IEC 61000-4-2Electrostatic discharge immunity test - test level: 8 kV level 3 (air discharge) conforming to EN/IEC 61000-4-2Fast transients immunity test - test level: 1 kV level 3 (capacitive connecting clip) conforming to IEC 61000-4-4Fast transients immunity test - test level: 2 kV level 3 (direct contact) conforming to IEC 61000-4-4Surge immunity test - test level: 1 kV level 3 (differential mode) conforming to IEC 61000-4-5Surge immunity test - test level: 2 kV level 3 (common mode) conforming to IEC 61000-4-5Radiated radio-frequency electromagnetic field immunity test - test level: 10 V level 3 (0.15...80 MHz) conforming to IEC 61000-4-6Electromagnetic field immunity test - test level: 10 V/m level 3 (80 MHz...1 GHz) conforming to IEC 61000-4-3Immunity to microbreaks and voltage drops - test level: 30 % (500 ms) conforming to IEC 61000-4-11Immunity to microbreaks and voltage drops - test level: 100 % (20 ms) conforming to IEC 61000-4-11Conducted and radiated emissions class B conforming to EN 55022 Packing Units Unit Type of Package 1PCE Number of Units in Package 11 Package 1 Weight102 g Package 1 Height2.6 cm Package 1 width8.2 cm Package 1 Length9.5 cm Unit Type of Package 2S02 Number of Units in Package 240 Package 2 Weight4.486 kg Package 2 Height15 cm Package 2 width30 cm Package 2 Length40 cm Offer Sustainability Sustainable offer statusGreen Premium product EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile
CatalogueFormatSizeAdd to My DocumentsCADFormatSizeAdd to My DocumentsBrochureFormatSizeAdd to My DocumentsCertificateFormatSizeAdd to My Documentsprp.document.label.format pdfSize 1.7 MBDate 5/23/19DescriptionRE22 and RENF22R2MMW CCC Certificate 2014010303687033Instruction sheetFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages14
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Connections and SchemaInternal Wiring DiagramWiring Diagram
Technical DescriptionFunction A : Power on Delay RelayDescription
The timing period T begins on energization. After timing, the output(s) relay close(s).
2 timed outputs (R1/R2) or 1 timed output (R1) and 1 instantaneous output (R2 inst.)Function At : Power on Delay Relay (Summation) with Control SignalDescription
After power-up, the first opening of control contact Y1 starts the timing. Timing can be interrupted each time control contact closes. When the cumulative total of time periods elapsed reaches the pre-set value T, the output relay closes.
T = t1+t2+t3Legend
Output closedY1 :
Control contactR1/R2 :
2 timed outputsR2 inst. :
The second output is instantaneous if the right position is selectedT :
Timing periodU :