Main range of productZelio Relay series namePower product or component typePlug-in relay device short nameRPF contacts type and composition2 NO [Uc] control circuit voltage120 V AC control typeWithout lockable test button shape of pinFlat contacts materialSilver tin oxide [Ithe] conventional enclosed thermal current25 A at -40…55 °C relays side by side without a gap30 A at -40…55 °C 13 mm gap between two relays Resistive rated load25 A at 28 V DC30 A at 250 V AC utilisation coefficient10 % Complementary mounting supportDIN railPanel control circuit voltage limits96...132 V [Ie] rated operational current30 A at 277 V (AC) NO conforming to UL20 A at 28 V (DC) NO conforming to UL30 A at 250 V (AC) NO conforming to IEC25 A at 28 V (DC) NO conforming to IEC [Ui] rated insulation voltage250 V conforming to IEC300 V conforming to UL [Uimp] rated impulse withstand voltage4 kV during 1.2/50 µs maximum switching voltage250 V conforming to IEC maximum switching capacity7500 VA/700 W Minimum recommended switching capacity6000 mW 500 mA / 12 V for NO operating rate<= 1200 cycles/hour under load<= 18000 cycles/hour no-load mechanical durability5000000 cycles electrical durability100000 cycles for resistive load Average coil consumption4 VA at 60 Hz drop-out voltage threshold>= 0.15 Uc Operate time25 ms Release time25 ms average resistance4250 Ohm at 20 °C +/- 15 % safety reliability dataB10d = 100000 protection categoryRT II test levelsLevel A group mounting operating positionAny position CAD overall width33.7 mm CAD overall height68.5 mm CAD overall depth39.2 mm net weight0.082 kg device presentationComplete product Environment dielectric strength2000 V AC between poles with basic4000 V AC between coil and contact with reinforced1500 V AC between contacts with micro disconnection standardsCSA C22.2 No 14UL 508EN/IEC 61810-1 product certificationsULCSAGOSTCE ambient air temperature for storage-40…85 °C ambient air temperature for operation-40…55 °C vibration resistance3 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles in operation10 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles not operating IP degree of protectionIP40 conforming to EN/IEC 60529 shock resistance10 gn for in operation30 gn for not operating pollution degree3 Offer Sustainability Sustainable offer statusGreen Premium product EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsCADFormatSizeAdd to My Documentsprp.document.label.format zipSize 128.2 KBDate 9/12/07CertificateFormatSizeAdd to My Documentsprp.document.label.format zipSize 1,017.6 KBDate 2/22/13prp.document.label.format htmSize 211 BDate 12/12/12DescriptionCSA Certificate RXM, RHK, RHN, RHZ, RPF in CSA MC225619China RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages14
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Connections and SchemaWiring Diagram
Symbols shown in blue correspond to Nema marking.
Performance CurvesElectrical Durability of ContactsAC Resistive loadXSwitching capacity (kVA)YDurability (number of operating cycles)AC Reduction coefficient for inductive load (depending on power factor cos ϕ)
Durability (inductive load) = durability (resistive load) x reduction coefficient.Yreduction coefficientMaximum switching capacity on DC resistive loadA30 AB25 A
Note : These are typical curves, actual durability depends on load, environment, duty cycle, etc.