power relay plug-in - Zelio RPF - 2 NO - 110 V DC - 25 AShow more characteristics
Main range of productZelio Relay series namePower product or component typePlug-in relay device short nameRPF contacts type and composition2 NO [Uc] control circuit voltage110 V DC shape of pinFlat contacts materialSilver tin oxide Resistive rated load25 A at 28 V DC30 A at 250 V AC utilisation coefficient10 % Complementary mounting supportDIN railPanel control circuit voltage limits88...121 V [Ie] rated operational current30 A at 277 V (AC) NO conforming to UL20 A at 28 V (DC) NO conforming to UL30 A at 250 V (AC) NO conforming to IEC25 A at 28 V (DC) NO conforming to IEC [Ui] rated insulation voltage250 V conforming to EN/IEC 60947 [Uimp] rated impulse withstand voltage4 kV conforming to IEC 61000-4-5 maximum switching voltage250 V conforming to IEC maximum switching capacity7500 VA/700 W Minimum recommended switching capacity170 mW operating rate<= 1200 cycles/hour under load<= 18000 cycles/hour no-load mechanical durability5000000 cycles electrical durability100000 cycles for resistive load Average coil consumption1.7 W drop-out voltage threshold>= 0.1 Uc DC Operate time20 ms Release time20 ms average resistance7255 Ohm at 20 °C +/- 10 % safety reliability dataB10d = 100000 protection categoryRT IV operating positionAny position net weight0.082 kg device presentationComplete product Environment dielectric strength2000 V AC between poles with basic4000 V AC between coil and contact with reinforced1500 V AC between contacts with micro disconnection standardsUL 508EN/IEC 61810-1CSA C22.2 No 14 product certificationsCSAGOSTULCE ambient air temperature for storage-40…85 °C ambient air temperature for operation-40…55 °C vibration resistance10 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles in operation conforming to EN/IEC 60068-2-273 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles not operating conforming to EN/IEC 60068-2-27 IP degree of protectionIP40 conforming to EN/IEC 60529 shock resistance10 gn for in operation conforming to EN/IEC 60068-2-2710 gn for not operating conforming to EN/IEC 60068-2-27 pollution degree3 Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity ProfileNo need of specific recycling operations WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CADFormatSizeAdd to My DocumentsSize zipSize 128.2 KBDate 9/12/07China RoHS declarationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Connections and SchemaWiring Diagram
Symbols shown in blue correspond to Nema marking.
Performance CurvesElectrical Durability of ContactsAC Resistive loadXSwitching capacity (kVA)YDurability (number of operating cycles)AC Reduction coefficient for inductive load (depending on power factor cos ϕ)
Durability (inductive load) = durability (resistive load) x reduction coefficient.Yreduction coefficientMaximum switching capacity on DC resistive loadA30 AB25 A
Note : These are typical curves, actual durability depends on load, environment, duty cycle, etc.