Main range of productZelio Relay series nameUniversal product or component typePlug-in relay device short nameRUM contacts type and composition3 C/O [Uc] control circuit voltage48 V DC [Ithe] conventional enclosed thermal current10 A at -40…55 °C status LEDWith control typeWithout lockable test button utilisation coefficient20 % Complementary shape of pinFlat [Ui] rated insulation voltage250 V conforming to IEC300 V conforming to CSA300 V conforming to UL [Uimp] rated impulse withstand voltage4 kV (1.2/50 µs) contacts materialAgNi [Ie] rated operational current10 A at 277 V AC conforming to UL10 A at 30 V DC conforming to UL10 A at 277 V AC (same polarity) conforming to CSA10 A at 30 V DC conforming to CSA5 A at 250 V AC (NC) conforming to IEC5 A at 28 V DC (NC) conforming to IEC10 A at 250 V AC (NO) conforming to IEC10 A at 28 V DC (NO) conforming to IEC maximum switching voltage250 V conforming to IEC Resistive rated load10 A at 250 V AC10 A at 28 V DC maximum switching capacity2500 VA/280 W minimum switching capacity170 mW at 10 mA, 17 V operating rate<= 18000 cycles/hour no-load<= 1200 cycles/hour under load mechanical durability5000000 cycles electrical durability100000 cycles for resistive load Average coil consumption in W1.4 W drop-out voltage threshold>= 0.1 Uc DC Operate time20 ms at nominal voltage Release time20 ms at nominal voltage Average coil resistance1800 Ohm at 20 °C +/- 15 % rated operational voltage limits38.4...52.8 V DC protection categoryRT I test levelsLevel A group mounting safety reliability dataB10d = 100000 operating positionAny position net weight0.086 kg device presentationComplete product Environment dielectric strength1500 V AC between contacts with micro disconnection2500 V AC between coil and contact with reinforced2000 V AC between poles with basic product certificationsULEACREACHRoHSCSA standardsCSA C22.2 No 14EN/IEC 61810-1UL 508 ambient air temperature for storage-40…85 °C ambient air temperature for operation-40…55 °C vibration resistance3 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles in operation4 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles not operating IP degree of protectionIP40 shock resistance10 gn (duration = 11 ms) for in operation conforming to EN/IEC 60068-2-2710 gn (duration = 11 ms) for not operating conforming to EN/IEC 60068-2-27 pollution degree3 Offer Sustainability Sustainable offer statusGreen Premium product REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity ProfileNo need of specific recycling operations
CertificateFormatSizeAdd to My Documentsprp.document.label.format zipSize 1,017.6 KBDate 2/22/13prp.document.label.format htmSize 211 BDate 12/12/12DescriptionCSA Certificate RXM, RHK, RHN, RHZ, RPF in CSA MC225619China RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Connections and SchemaWiring DiagramWiring Diagram
Symbols shown in blue correspond to Nema marking.
Performance CurvesElectrical Durability of Contacts
Durability (inductive load) = durability (resistive load) x reduction coefficient.
Resistive AC loadXSwitching capacity (kVA)YDurability (Number of operating cycles)
Reduction coefficient for inductive AC load (depending on power factor cos ϕ)YReduction coefficient (A)
Maximum switching capacity on resistive DC loadXVoltage DCYCurrent DC
Note : These are typical curves, actual durability depends on load, environment, duty cycle, etc.