Main range of productHarmony XAC product or component typePendant control station device short nameXACA Complementary control station typeDouble insulated enclosure materialPolypropylene electrical circuit typeControl circuit enclosure typeComplete ready for use control station applicationControl of single speed hoist motor control station composition4 push-buttons + 1 emergency stop control button typeFirst push-button 1 NC + 1 NO raise, slowSecond push-button 1 NC + 1 NO lower, slowStop push-button Ø 40 mm 1 NC latchingFourth push-button 1 NC + 1 NO left, slowThird push-button 1 NC + 1 NO right, slow product compatibilityZB2BE102 for emergency stopZB2BE102 + ZB2BE101 for each direction mechanical interlockingWith mechanical interlocking between pairs control station colourYellow connections - terminalsScrew clamp terminals, 1 x 0.5...1 x 2.5 mm² without cable endScrew clamp terminals, 1 x 0.5...2 x 1.5 mm² with cable end standardsEN/IEC 60947-5-1CSA C22.2 No 14UL 508EN/IEC 60204-32 product certificationsGOSTCCC protective treatmentTH ambient air temperature for operation-25…70 °C ambient air temperature for storage-40…70 °C vibration resistance15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6 shock resistance100 gn conforming to IEC 60068-2-27 overvoltage categoryClass II conforming to IEC 61140 IP degree of protectionIP65 conforming to IEC 60529 IK degree of protectionIK08 conforming to EN 50102 mechanical durability1000000 cycles cable entryRubber sleeve with stepped entry 8…26 mm contact code designationA600 AC-15, Ue = 240 V, Ie = 3 A conforming to IEC 60947-5-1 appendix AA600 AC-15, Ue = 600 V, Ie = 1.2 A conforming to IEC 60947-5-1 appendix AQ600 DC-13, Ue = 250 V, Ie = 0.27 A conforming to IEC 60947-5-1 appendix AQ600 DC-13, Ue = 600 V, Ie = 0.1 A conforming to IEC 60947-5-1 appendix A [Ithe] conventional enclosed thermal current10 A [Ui] rated insulation voltage600 V (pollution degree 3) [Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947-1 contact operationSlow-break maximum resistance across terminals25 MOhm operating force13 N push-button8 N emergency stop short-circuit protection10 A fuse protection by cartridge fuse type gG rated operational power in W40 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 120 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C48 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 48 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C65 W DC-13 for 1000000 cycles, operating rate <60 cyc/mn at 24 V, load factor = 0.5 (inductive load) conforming to IEC 60947-5-1 appendix C terminals description ISO n°1(11-12)NC(13-14)NO terminals description ISO n°2(11-12)NC terminal identifier(11-12)NC(13-14)NO net weight0.815 kg Packing Units Unit Type of Package 1PCE Number of Units in Package 11 Package 1 Weight848 g Package 1 Height10 cm Package 1 width11 cm Package 1 Length51.7 cm Offer Sustainability Sustainable offer statusGreen Premium product REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CADFormatSizeAdd to My Documentsprp.document.label.format zipSize 141.9 KBDate 1/8/08CertificateFormatSizeAdd to My DocumentsInstruction sheetFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages10
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.