Main range of productHarmony XALD product or component typeComplete control station device short nameXALD product destinationFor XB5 Ø 22 mm control and signalling units control station applicationThree functions colour of base of enclosureLight grey (RAL 7035) colour of coverDark grey (RAL 7016) materialPolycarbonate operator profile3 flush push-buttons operators descriptionGreen ''I'' 1 NO - red ''O'' 1 NC - green ''II'' 1 NO control station composition1 flush push-button, red 1 NC O marking1 flush push-button, green 1 NO I marking1 flush push-button, green 1 NO II marking marking locationMarking on push-button contact operationSlow-break Complementary cable entry2 knock-outs for cable entry, clamping capacity: 14 mm2 knock-outs for Pg 13 cable gland and ISO M20, clamping capacity: 12 mm net weight0.298 kg resistance to high pressure washer7000000 Pa at 55 °C, distance : 0.1 m colour of markingWhite marking when green, red or black capsBlack marking when white caps positive openingWith conforming to EN/IEC 60947-5-1 appendix K operating travel1.5 mm (NC changing electrical state)2.6 mm (NO changing electrical state)4.3 mm (total travel) operating force3.5 N NC changing electrical state3.8 N NO changing electrical state mechanical durability5000000 cycles connections - terminalsScrew clamp terminals, <= 2 x 1.5 mm² with cable end conforming to EN/IEC 60947-1Screw clamp terminals, >= 1 x 0.22 mm² without cable end conforming to EN/IEC 60947-1 tightening torque0.8…1.2 N.m conforming to EN/IEC 60947-1 shape of screw headCross compatible with Philips no 1 screwdriverCross compatible with pozidriv No 1 screwdriverSlotted compatible with flat Ø 4 mm screwdriverSlotted compatible with flat Ø 5.5 mm screwdriver contacts materialSilver alloy (Ag/Ni) short-circuit protection10 A cartridge fuse type gG conforming to EN/IEC 60947-5-1 [Ith] conventional free air thermal current10 A conforming to EN/IEC 60947-5-1 [Ui] rated insulation voltage600 V (pollution degree 3) conforming to EN/IEC 60947-1 [Uimp] rated impulse withstand voltageEN/IEC 60947-1 6 kV [Ie] rated operational current6 A at 120 V, AC-15, A600 conforming to EN/IEC 60947-5-13 A at 240 V, AC-15, A600 conforming to EN/IEC 60947-5-11.2 A at 600 V, AC-15, A600 conforming to EN/IEC 60947-5-10.55 A at 125 V, DC-13, Q600 conforming to EN/IEC 60947-5-10.27 A at 250 V, DC-13, Q600 conforming to EN/IEC 60947-5-10.1 A at 600 V, DC-13, Q600 conforming to EN/IEC 60947-5-1 electrical durability1000000 cycles, AC-15, 2 A at 230 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C1000000 cycles, AC-15, 3 A at 120 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C1000000 cycles, AC-15, 4 A at 24 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C1000000 cycles, DC-13, 0.2 A at 110 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C1000000 cycles, DC-13, 0.5 A at 24 V, operating rate <3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C electrical reliabilityΛ < 10exp(-6) at 5 V and 1 mA conforming to EN/IEC 60947-5-4Λ < 10exp(-8) at 17 V and 5 mA conforming to EN/IEC 60947-5-4 Environment protective treatmentTH ambient air temperature for storage-40…70 °C ambient air temperature for operation-40…70 °C electrical shock protection classClass II conforming to IEC 60536 IP degree of protectionIP66 conforming to IEC 60529IP69IP69KIP67 NEMA degree of protectionNEMA 13NEMA 4X IK degree of protectionIK03 conforming to EN 50102 standardsEN/IEC 60947-5-5UL 508EN/IEC 60947-1JIS C8201-5-1EN/IEC 60947-5-4EN/IEC 60947-5-1CSA C22.2 No 14JIS C8201-1 product certificationsUL listedCSA vibration resistance5 gn (f= 12…500 Hz) conforming to IEC 60068-2-6 shock resistance30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-2750 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27
CertificateFormatSizeAdd to My DocumentsInstruction sheetFormatSizeAdd to My DocumentsSize pdfSize 186.4 KBDate 6/1/07DescriptionInstructions indicating allowable ZBZ32, ZBYZ, and ZBY4 Legend holders and ZB5A pushbuttons for harmony XALD and XALK control stations. Document W91528482 1528482 W9152848201 W915284820111 W91528482 0111A01
- All Languages6
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)2 knock-outs for Pg 13.5 cable gland, maximum capacity 12 mm/0.47 in.(2)Knock-out for cable entry, maximum capacity 14 mm/0.55 in.
Control station fitted with:
c in mm
c in in.