Main range of productPreventa Safety detection product or component typePreventa RFID safety switch component nameXCSRC Complementary designRectangular, standard sizeTransponder: 50 x 15 x 15 mmReader: 108.3 x 30 x 15 mm materialValox electrical connection1 male connector connector typeM12 male type of output stageSolid-state, PNP safety outputs2 NO number of poles8 local signallingGreen, orange and red 2 multi-colour LEDs [Sao] assured operating sensing distance10 mm face to face [Sar] assured release sensing distance35 mm face to face approach directions3 directions-transponder with rotary sensing face [Ue] rated operational voltage24 V DC (- 20...10 %)SELV or PELV conforming to EN/IEC 60204-1 [Ie] rated operational current60 mA [Ui] rated insulation voltage30 V DC [Uimp] rated impulse withstand voltage0.8 kV IEC 60947-5-2 protection typeShort-circuit protection maximum switching voltage26.4 V DC switching capacity in mA400 mA switching frequency<= 0.5 Hz risk time120 ms response time250 ms typical maximum delay first up5 s tightening torque< 1.5 N.m standardsEN/IEC 60947-5-3ISO 14119EN/IEC 60947-5-2 product certificationsICRCMEcolabTÜVCSA 22-2E2EACFCC markingRCMICEACFCCTÜVCULusCE safety levelSIL 3 conforming to EN/IEC 61508SILCL 3 conforming to EN/IEC 62061PL = e conforming to EN/ISO 13849-1Category 4 conforming to EN/ISO 13849-1 safety reliability dataPFHD = 5E-10/h conforming to EN/IEC 62061PFHD = 5E-10/h conforming to EN/ISO 13849-1 mission time20 year(s) ambient air temperature for operation-25…70 °C ambient air temperature for storage-40…85 °C vibration resistance10 gn (f= 10…150 Hz) conforming to EN/IEC 60068-2-6 shock resistance30 gn for 11 ms conforming to EN/IEC 60068-2-27 electrical shock protection classClass III conforming to EN/IEC 61140 IP degree of protectionIP65 conforming to EN/IEC 60529IP66 conforming to EN/IEC 60529IP67 conforming to EN/IEC 60529IP69K conforming to DIN 40050 Offer Sustainability REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
CatalogueFormatSizeAdd to My Documentsprp.document.label.format pdfSize 23.5 MBDate 5/18/20DescriptionXCSM miniature safety limit switches.XCSP and XCSD compact safety limit switches. XCSPL, XCSPR and XCSTR lever or spindle-operated safety switches. XCSA, XCSB, XCSC, XCSMP, XCSPA and XCSTA slim safety switches. XCSLE and XCSLF slim safety interlock switches. XCSE and XCSTE rectangular safety interlock switches. XCSR contactless RFID safety switches. XCSDMC, XCSDMP and XCSDMR coded magnetic safety switches.User guideFormatSizeAdd to My Documentsprp.document.label.format pdfSize 8.8 MBDate 7/1/17DescriptionThis manual describes the features, installation, wiring, usage, and troubleshooting of the XCSR RFIDSafety Switches.BrochureFormatSizeAdd to My DocumentsCertificateFormatSizeAdd to My Documentsprp.document.label.format pdfSize 65.1 KBDate 10/19/17DescriptionTÜV type examination certificateprp.document.label.format htmlSize 301 BDate 6/12/17DescriptionUL certification record (listed products)prp.document.label.format htmlSize 323 BDate 6/12/17DescriptioncUL certification record (listed products, for Canada)prp.document.label.format pdfSize 169.9 KBDate 5/31/17DescriptionIC technical acceptance certificateprp.document.label.format pdfSize 80 KBDate 5/11/17DescriptionFCC grant of equipment authorizationInstruction sheetFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages38
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Connections and SchemaConnectionsM12 Connector, 8-pin(1)+ 24 VDC(2)OSSD2(3)0 VDC(4)OSSD1(5)EDM_ST_1(6)EDM_ST_2(7)NC (Not connected)(8)NC (Not connected)ConnectionsWiring Diagram
Cat. 4 / PL=e (EN/ISO 13849-1) / SIL3 (IEC 61508) / SILCL3 IEC 62061)(1)Power Supply(2)Reader(3)Transponder(4)1 A max.(5)Restart(6)Use of arc suppressors for KM1 and KM2 is recommended.(7)Power circuit
NOTE: KM1 and KM2 contactors must have force-guided contacts.
Mounting and ClearanceMounting and ClearanceFace to Face Mounting (Preferred Configuration)
Example n°2e:Recommended minimum mounting distance between transponder and reader.e:Recommended minimum mounting distance between transponder and reader.Face to Face Mounting (Preferred Configuration)
Example n°3e min.> 2 mm. (e: recommended minimum mounting distance between transponder and reader)d :Detection limitMounting and ClearanceSide by Side Mounting
Correct Mounting Configuratione:Recommended minimum mounting distance between transponder and reader.Mounting and ClearanceMinimum Mounting Clearances between Safety Switches
Dimensions in mm
Dimensions in in.
Performance CurvesDetection CurvesFace to Face Mounting (Preferred Configuration)
Sao and Sar sensing distances along Y axis as function of Z (longitudinal misalignment for X=0)Sar:Assured release distanceSao:Assured operating distance(1)Recommended minimum mounting distance between transponder and reader.
Sao and Sar sensing distances along X axis as function of Z (transverse misalignment for Y=0)Sar:Assured release distanceSao:Assured operating distance(1)Recommended minimum mounting distance between transponder and reader.Detection CurvesSide by Side Mounting
Sao and Sar sensing distances along Y axis as function of X (longitudinal misalignment for Z=0mm)Sar:Assured release distanceSao:Assured operating distance(1)X=0 for X<0(2)X=0 for X>0(3)Recommended minimum mounting distance between transponder and reader.
Sao and Sar sensing distances along Z axis as function of X (transverse misalignment for Y=0mm)Sar:Assured release distanceSao:Assured operating distance(1)X=0 for X<0(2)X=0 for X>0(3)Recommended minimum mounting distance between transponder and reader.