XPSCM1144

Preventa Safety detection

Safety module

XPSCM

For monitoring of single beam photo-electric sensor

Built-in muting

Can reach category 2 with the appropriate control system and correctly wired conforming to EN/ISO 13849-1
Can reach SILCL 1 with the appropriate control system and correctly wired conforming to EN/IEC 62061
Can reach PL = c with the appropriate control system and correctly wired conforming to EN/ISO 13849-1

MTTFd = 16.6 years conforming to EN/ISO 13849-1
DC = 95.5 % conforming to EN/ISO 13849-1
PFH = 3.12E-7 1/h conforming to EN/IEC 61508
PFHd = 3.12E-7 1/h conforming to EN/IEC 62061

2 (terminal(s) MA, MB) for muting function
4 (terminal(s) Z1, Z2, Z3, Z4) for sensor

24 V DC for sensor
24 V DC (terminal(s) U+, U-) for muting function

XC limit switch for muting function
XU2M18PP340... for muting function
XU2S18PP340... (infrared) for sensor
XU9M18PP340... for muting function

Captive screw clamp terminals, 1 x 0.14...1 x 2.5 mm² solid or flexible without cable end
Captive screw clamp terminals, 1 x 0.25...1 x 1.5 mm² flexible with cable end, with bezel
Captive screw clamp terminals, 1 x 0.25...1 x 2.5 mm² flexible with cable end, without bezel
Captive screw clamp terminals, 2 x 0.14...2 x 0.75 mm² solid or flexible without cable end
Captive screw clamp terminals, 2 x 0.25...2 x 1 mm² flexible with cable end, without bezel
Captive screw clamp terminals, 2 x 0.5...2 x 1.5 mm² flexible with cable end, with double bezel

Relay 2 NO (13-14, 23-24), volt-free

0

24 V DC - 20...20 %

U+, U-: 24 V DC

200 mA

200 mA for muting function

3 s (+/- 20 %) for the activation of the MA/MB muting signal

60 s (- 10...30 %)

10 Ohm for sensor power supply

180 VA holding AC-15 C300 relay output
1800 VA inrush AC-15 C300 relay output

20 mA at 24 V for solid state output
1.5 A at 24 V (DC-13) time constant: 50 ms for relay output

4 A gG for relay output conforming to DIN VDE 0660 part 200
4 A gG for relay output conforming to EN/IEC 60947-5-1
6 A fast blow for relay output conforming to DIN VDE 0660 part 200
6 A fast blow for relay output conforming to EN/IEC 60947-5-1

10 mA for relay output

17 V for relay output

25 ms

1 LED, function electronic internal fuse status
1 LED, function restarting
1 LED, function safety outputs closed
1 LED, function safety outputs open
1 incandescent lamp, function muting power consumption: 4…6.5 W

5.6 A per relay
11 A maximum

15 W

Electronic internal fuse

300 V (pollution degree 2) conforming to DIN VDE 0110 parts 1 and 2
300 V (pollution degree 2) conforming to EN/IEC 60947-5-1

4 kV overvoltage category III conforming to DIN VDE 0110 parts 1 and 2
4 kV overvoltage category III conforming to EN/IEC 60947-5-1

-10…55 °C

-25…85 °C

IP20 (terminals) conforming to IEC 60529
IP40 (enclosure) conforming to IEC 60529

Green Premium product

REACh Declaration

Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration

Yes

Yes

China RoHS declaration

Product Environmental Profile

End of Life Information

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

18 months