Main range of productOsiSense XS series nameGeneral purpose sensor typeInductive proximity sensor sensor nameXS1 sensor designCylindrical M12 size55 mm body typeFixed enclosure materialNickel plated brass type of output signalDiscrete wiring technique3-wire [Sn] nominal sensing distance2 mm discrete output function1 NC discrete output typePNP electrical connectionMale connector M12, 4 pins [Us] rated supply voltage12...24 V DC with reverse polarity protection switching capacity in mA<= 200 mA with overload and short-circuit protection IP degree of protectionIP67 conforming to IEC 60529 Complementary ISO threadM12 x 1 detection faceFrontal detector flush mounting acceptanceFlush mountable materialMetal front materialPBT operating zone0…1.6 mm differential travel1...15% of Sr output circuit typeDC status LEDOutput state: 1 LED (yellow) supply voltage limits10…36 V DC switching frequency<= 2500 Hz maximum voltage drop<2 V (closed) current consumption<= 10 mA no-load maximum delay first up15 ms maximum delay response0.1 ms maximum delay recovery0.15 ms markingCE threaded length34 mm height12 mm length55 mm net weight0.015 kg Environment ambient air temperature for operation-25…70 °C ambient air temperature for storage-40…85 °C vibration resistance25 gn amplitude = +/- 2 mm (f = 10…55 Hz) conforming to IEC 60068-2-6 shock resistance50 gn for 11 ms conforming to IEC 60068-2-27 Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information Environmental Disclosure Circularity Profile Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My Documentsprp.document.label.format pdfSize 3 MBDate 10/29/18DescriptionBasic inductive proximity sensors, increased and standard ranges: selection guide, general presentation, references, characteristics, connections, setting-up, dimensions and detection curves.CertificateFormatSizeAdd to My Documentsprp.document.label.format pdfSize 422.3 KBDate 11/23/15DescriptionLOVAG certificate of conformityDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My Documents
- All Languages14
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Mounting and ClearanceMinimum Mounting Distances
Side by sidee (1) ≥4 mm/0.16 in.
Face to facee (2) ≥24 mm/0.94 in.
Facing a metal objecte (3) ≥6 mm/0.24 in.
Connections and SchemaWiring Schemes
PNP1 :(+)2 :NC Output3 :(-)4 :Not connected
Performance CurvesPerformance CurvesStandard Steel Target : 12x12x1 mm(1)Pick-up points(2)Drop-out points (object approaching from the side)(y)Sensing distance in mm