View all OsiSense XS & XT
To be discontinued
To be discontinued
inductive sensor XS5 M8 - L33mm - brass - Sn1.5mm - 12..24VDC - cable 5mShow more characteristics
To be discontinued on 30 November 2020
The maximum number of products that can be compared is 4. Remove already added products.
Main range of productOsiSense XS series nameGeneral purpose sensor typeInductive proximity sensor device application- sensor nameXS5 sensor designCylindrical M8 size33 mm body typeFixed detector flush mounting acceptanceFlush mountable materialMetal type of output signalDiscrete wiring technique2-wire [Sn] nominal sensing distance1.5 mm discrete output function1 NO output circuit typeDC electrical connectioncable cable length5 m [Us] rated supply voltage12...24 V DC with reverse polarity protection switching capacity in mA1.5...100 mA DC with overload and short-circuit protection IP degree of protectionIP67 conforming to IEC 60529 Complementary thread typeM8 x 1 detection faceFrontal front materialPPS enclosure materialNickel plated brass operating zone0…1.2 mm differential travel1...15% of Sr cable composition2 x 0.11 mm² wire insulation materialPvR status LEDOutput state: 1 LED (yellow) supply voltage limits10…36 V DC maximum residual current0.5 mA open state switching frequency<= 4000 Hz maximum voltage drop<4 V (closed) maximum delay first up10 ms maximum delay response0.2 ms maximum delay recovery0.2 ms markingCE threaded length25 mm height8 mm length33 mm net weight0.15 kg Environment product certificationsCSAUL ambient air temperature for operation-25…70 °C ambient air temperature for storage-40…85 °C vibration resistance25 gn amplitude = +/- 2 mm (f = 10…55 Hz) conforming to IEC 60068-2-6 shock resistance50 gn for 11 ms conforming to IEC 60068-2-27 Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information Environmental Disclosure Circularity Profile Contractual warranty Warranty18 months
CertificateFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My Documents
- All Languages6
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Mounting and ClearanceMinimum Mounting Distances
Side by sidee (1) ≥3 mm/0.12 in.
Face to facee (2) ≥18 mm/0.71 in.
Facing a metal objecte (3) ≥4.5 mm/0.18 in.Mounting(1)Bending cable: 4 x external cable diameter
Connections and SchemaWiring Schemes2-Wire DC Polarised
NO outputBU :BlueBN :Brown
Performance CurvesPerformance CurvesStandard Steel Target : 8x8x1 mm(1)Pick-up points(2)Drop-out points (object approaching from the side)(y)Sensing distance in mm