Main range of productHarmony XVM product or component typePre-assembled and pre-cabled indicator bank beacon or indicator bank unit type2 illuminated units component nameXVM light sourceOrange incandescent bulb with BA 15d base steady signalling <5 WRed incandescent bulb with BA 15d base steady signalling <5 W light block colorRed/orange [Us] rated supply voltage120 V AC indicator bank base typeBase with integrated buzzer mounting modeVertical Complementary kit compositionPlastic fixing plateAluminium support tubeCoverBase unit mounting diameter45 mm connections - terminalsFlying leads,clamping capacity: 1 x 0.325 mm² (AWG 22) markingCE mounting supportAluminium tube [Ui] rated insulation voltage250 V conforming to IEC 60947-1 nominal voltage limit0.85...1.1 Un conforming to IEC 60947-5-1 current consumption18 mA on base unit [Uimp] rated impulse withstand voltage4 kV IEC 60947-1 fundamental frequency4 kHz product weight0.402 kg Environment IP degree of protectionIP54 vertical position conforming to IEC 60529 product certificationsCCC standardsEN/IEC 60947-1EN/IEC 60947-5-1 ambient air temperature for storage-25…70 °C ambient air temperature for operation-10…50 °C overvoltage categoryClass I conforming to IEC 60947-1Class I conforming to IEC 60947-5-1Class I conforming to IEC 61140 protective treatmentTC noise level0…80 dB at 1 m Contractual warranty Warranty18 months
CertificateFormatSizeAdd to My DocumentsInstruction sheetFormatSizeAdd to My Documents
- All Languages4
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsPre-Assembled and Pre-Cabled Tower Light with Fixing Base for Mounting on Vertical Support (Support Tube + Metal Bracket)Dimensions
Below drawing shows the maximum configuration of the product. Select the number of stages according to the product characteristics in order to get b2 dimension.(1)Base unit with or without buzzer.
Number of illuminated units
b2 in mm
b2 in in.
Connections and SchemaPre-Assembled and Pre-Cabled Tower LightWire Colors
4th illuminated unit: yellow wire
3rd illuminated unit: green wire
2nd illuminated unit: white wire
1st illuminated unit: blue wire
Common: black wire
Buzzer (if integrated in base unit): grey wire
Technical DescriptionBase Unit with Integral BuzzerAdjustment of Audible Signal
View from above:(1)Volume adjustment potentiometer: 0 to 85 dB. Use either a cross headed or flat tipped screwdriver.(2)2-position selector for type of audible signal: continuous tone or intermittent tone