Main range of productHarmony XB4 product or component typeHead for illuminated selector switch product compatibilityIntegral LED device short nameZB4 bezel materialBlack metal head typeStandard mounting diameter22 mm sale per indivisible quantity1 shape of signaling unit headRound type of operatorstay put operator profileOrange standard handle operator position information2 positions 90° Complementary CAD overall width29 mm CAD overall height29 mm CAD overall depth43 mm net weight0.036 kg resistance to high pressure washer7000000 Pa at 55 °C, distance : 0.1 m mechanical durability1000000 cycles electrical composition codeM3 for <4 contacts using single blocks in front mounting with integral LEDM6 for <2 contacts using single blocks in front mounting with integral LED and transformerM10 for <2 contacts using single blocks in front mounting with integral LEDM4 for <4 contacts using single and double blocks in front mounting with integral LED device presentationBasic element Environment protective treatmentTH ambient air temperature for storage-40…70 °C ambient air temperature for operation-40…70 °C overvoltage categoryClass I conforming to IEC 60536 IP degree of protectionIP66 conforming to IEC 60529IP67IP69IP69K NEMA degree of protectionNEMA 13NEMA 4X IK degree of protectionIK06 conforming to IEC 50102 standardsEN/IEC 60947-5-5CSA C22.2 No 14UL 508EN/IEC 60947-5-1EN/IEC 60947-1JIS C8201-5-1EN/IEC 60947-5-4JIS C8201-1 product certificationsDNVUL listedRINALROS (Lloyds register of shipping)BVCSAGL vibration resistance5 gn (f= 2…500 Hz) conforming to IEC 60068-2-6 shock resistance30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-2750 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27 Packing Units Package 1 Weight0.040 kg Package 1 Height0.560 dm Package 1 width0.340 dm Package 1 Length0.540 dm Offer Sustainability REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile Contractual warranty Warranty18 months
CertificateFormatSizeDateAdd to My DocumentsInstruction sheetFormatSizeDateAdd to My DocumentsChina RoHS declarationFormatSizeDateAdd to My DocumentsEnd of Life InformationFormatSizeDateAdd to My DocumentsEU RoHS DeclarationFormatSizeDateAdd to My DocumentsMarine certificateFormatSizeDateAdd to My Documents
- All Languages11
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
Connection by Faston Connectors(1)Diameter on finished panel or support(2)40 mm min. / 1.57 in. min.(3)30 mm min. / 1.18 in. min.(4)Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm 0+0.4 / 0.88 in. 0+0.016)(5)45 mm min. / 1.78 in. min.(6)32 mm min. / 1.26 in. min.Pushbuttons, Switches and Pilot Lights for Printed Circuit Board ConnectionPanel Cut-outs (Viewed from Installer’s Side)A:30 mm min. / 1.18 in. min.B:40 mm min. / 1.57 in. min.Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)
Dimensions in mmA:30 mm min.B:40 mm min.
Dimensions in in.A:1.18 in. min.B:1.57 in. min.General Tolerances of the Panel and Printed Circuit Board
The cumulative tolerance must not exceed 0.3 mm / 0.012 in: T1 + T2 = 0.3 mm max.Installation Precautions
Minimum thickness of circuit board: 1.6 mm / 0.06 in.
Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
Orientation of body/fixing collar ZB4 BZ009: ± 2°30’ (excluding cut-outs marked a and b).
Tightening torque of screws ZBZ 006: 0.6 N.m (5.3 lbf.in) max.
Allow for one ZB4 BZ079 fixing collar/pillar and its fixing screws:
every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).
with each selector switch head (ZB4 BD•, ZB4 BJ•, ZB4 BG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.(1)Panel(2)Printed circuit boardMounting of Adapter (Socket) ZBZ 01•
1 2 elongated holes for ZBZ 006 screw access
2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ 01•
3 8 × Ø 1.2 mm / 0.05 in. holes
4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ 01•
Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ 01•.
Technical DescriptionElectrical Composition Corresponding to Code M3Electrical Composition Corresponding to Code M4Electrical Composition Corresponding to Codes M6 and P2Electrical Composition Corresponding to Codes M5, M10, MF1, MR1 and MF2Legend
Possible locationSequence of Contacts Fitted to 2-position Selector Switch BodyPosition 315°