{"searchBar":{"inputPlaceholder":"Search by keyword or ask a question","searchBtn":"Search","error":"Please enter a keyword to search"}}
{}

Welcome to the Schneider Electric Website

Welcome to our website.

Select your location

Welcome the the Schneider Electric French website. It looks like you are located in the United States, would you like to change your location?

Traduisez en francais
{"support":{"yesButton":"Yes","noButton":"No","feedback":{"title":"What can we do to improve?"},"submitButton":"Submit","successMessage":"Thank you for your feedback","title":"Was this helpful?","feedbackPercentLabel":"of people found this helpful","captcha":{"error":"Please tick the box"}}}
Search FAQs

In SFT2841 connected mode, Logipam settings can not be accessed. How can this be solved?

Issue:
SFT2841 is connected to Sepam series 80. When trying to access Logipam settings, it was found not activated.

Environment:
Sepam 80 Logipam
Sepam 80 setting tool SFT2841

Resolution:
If Logipam settings can not be accessed in SFT2841 connected mode as shown below, then the following steps has to be followed:
- Create a SFT SAV report
- In the report, check whether Logipam option exists or not (activated or not)
- If Logipam option does not exist, a new memory cartridge including the option has to be ordered



Note:
- Logipam reference is 59711.