User guideLanguageFormatSizeDateEnglishprp.document.label.format pdfSize 112.4 KBDate 2019/09/01DescriptionThis technical note outlines the compliance of applicable PowerLogic meters with the International Electrotechnical Commission’s IEC 61000-4-30 (or “4-30”) standard, and is intended for personnelwith knowledge of power quality and power quality standards.Englishprp.document.label.format pdfSize 79.9 KBDate 2019/06/24DescriptionFirmware version v415 for the ION7550/ ION7650 series meter adds a number of security enhancements to your meter such as the closing of unused ports, changing port assignments and tracking security events can help minimize the possibility of unauthorized intrusion.Englishprp.document.label.format pdfSize 258.5 KBDate 2017/03/01DescriptionThis technical note summarizes the EN50160 data and statistics measured by the PowerLogic™ ION™ meters that monitor compliance to the EN51060:2010 standard, and includes references to the applicable parts of IEC 61000-4-30.
Software - ReleasedLanguageFormatSizeDateEnglishprp.document.label.format exeSize 119 MBDate 2019/12/15DescriptionCET850 is the IEC 61850 Edition 1 & 2 configurator associated with the Sepam/Easergy P3 and P5 /ION7x50/ION8650/MTZ devices.The CET850 software enables protection and integration engineers to designautomated substations containing Schneider Electric Intelligent Electronic Devices(IED) compliant with the IEC 61850 Standard.CET850 provides a set of functions to create, edit, and display IEC 61850configuration files based on the Substation Configuration Language (SCL)in conformance with IEC 61850 part 6.CET850 deals with the following SCL files:- ICD files: IED Capabilities Description- IID files: Instantiated IED Description- CID files: Configured IED Description- SCD files: Substation Configuration DescriptionCET850 is delivered with a library of ICD files that provides the IEC 61850 descriptionof the Schneider Electric Sepam,ION7x50,ION8650 and G3200 range IEDs.CET850 can be used to:- Create an IEC 61850 configuration or modifying an existing one by adding Sepam IEDs using their ICD file.- Edit an SCL file (ICD, IID, CID or SCD) to modify its contents: > Display the device and system configuration > Add or remove IEDs > Set or modify the communication parameter values > Optimize the configuration by creating or modifying Datasets, Report Control Blocks and Goose Control Blocks.- Generate the CID file for storing the configuration of one IED, which can then be downloaded to the devices via FTP protocol , or SFT2841 Sepam commisionning tool for SEPAMs only.- Generate an IID file for storing the configuration of an IED which can then be used by other IEC 61850 configuration tools.- Generate an SCD file for storing the configuration of an IEC 61850 system which can then be used by other IEC 61850 configuration tools.CET850 enables the optimization of data transfered within the system by:- Creating or adapt DataSets to gather relevant data- Creating or adapt Report Control Blocks to define the transmission conditions- Setting deadband values for sending measurements reports- Creating or adapt Goose Control Blocks to define the peer-to-peer data exchange based on the producer/consumer communication model.The configuration of peer-to-peer communication between Sepam devices (Goose messaging)is avalaible to implement specific distributed protection and control functionslike inter-locking, inter-tripping, logic discrimination, ... CET850 is delivered with a library ICD files for all devices range IEDs.ICD files from other manufacturers may be used, and IID, SCD and CID files coming from otherIEC 61850 configuration tools may be edited with CET850.Nevertheless, some specific editing features are restricted to Schneider Electric IEDs.Software - UpdatesLanguageFormatSizeDateEnglishprp.document.label.format msiSize 6 MBDate 2012/06/21DescriptionUse the attached .msi installation file to upgrade ION Enterprise V6.0 (supports V5.6 SP2 and higher systems) to add support for the ION7650/ION7550 devices that have the features associated with the latest version of the firmware and application logic (i.e. framework or device template). Please note that this updater executable should be applied to all machines in your ION Enterprise network, including all primary, secondary and client machines, for the upgrades to be completely effective. BACKGROUND INFORMATION:What is the Updater program? When versions of ION Enterprise are released, they support meters only up to the date of release. In order for our software to correctly recognize new firmware versions on the meters, the Updater program was created. These files are designed to install the components necessary (Vista diagrams etc.) to support the new firmware releases for ION meters. Key Words and Phrases: Device Support in ION EnterpriseFirmware - ReleasedLanguageFormatSizeDateEnglishprp.document.label.format zipSize 3.4 MBDate 2019/05/03Files in documentupg3.3 MBDescriptionFirmware version v415 for the ION7550 series meter adds a number of security enhancements to your meter. Features such as the closing of unused ports, changing port assignments and tracking security events can help minimize the possibility of unauthorized intrusion.For additional information please review the Whats new document (7EN12-0321-00_Whats_new_ION7550_ION7650_firmware_v415) in the downloadable content below.SHA256 File signatures:de1e135b355c91985c39aa8b4da43cc6173d10f2434f0f702f1aa42f9fbae939