Welcome to the Schneider Electric Website

Welcome to our website.

Select your location

AccuSine PCS+

The Schneider Electric solution for active harmonic filtering in industrial installations.

Part of Set Series

AccuSine PCS+ is a flexible, high performance, cost-effective solution for stabilizing electrical networks by providing harmonic mitigation, power factor correction and load balancing.

AccuSine PCS+
  • Features

     

    • A complete solution for harmonic filtering that meets every harmonic standard around the world.
    • Can be operated as a displacement power factor correction and load balancing device independent of or in conjunction with harmonic mitigation.

    Technical Data
    Standard RMS output current ratings

    • 60 A, 120 A, 200 A, 300 A - 380 V AC to 480 V AC
    • 47 A, 94 A, 157 A, 235 A - 480-600 V AC
    • 40 A, 80 A, 133 A , 200 A - 600-690 V AC

    Nominal voltage

    • 380-480 V AC; +10%/-15%
    • 480-600 V AC; +10%/-15%
    • 600-690 V AC; +10%/-15%

    Up to 15kV with custom transformers

    Nominal frequency

    • 50/60 Hz, ±3 Hz auto sensing

    Number of phases

    • 3-phase, with or without neutral

    Spectrum cancellation

    • 2nd to 51st, discrete; fully selectable per harmonic order (amplitude and on/off)

    Harmonic Attenuation

    • Closed Loop: < 3 % THD(i); max 20:1 THD(i) reduction with load harmonic current above 50 % of AccuSine PCS+ rating
    • Open Loop: < 5 % TDD
    • Requires 3 % or higher inductive impedance per nonlinear load

    Power factor correction

    • Optimized unity PF, Leading (capacitive) or lagging (inductive) power factor (Cos φ) to target

    Mains current balancing

    • Negative sequence current injected to balance fundamental current on the mains due to load imbalance (inherently corrects displacement PF (Cos φ))

    Control response time

    • 25 μs

    Harmonic correction time

    • 2 cycles

    Reactive correction time

    • 1/4 cycle

    Operating Temperature

    • 60 A, 120 A & 200 A: IP00, IP20, UL Type Open, & UL Type 1 configurations -0 °C to 45 °C
    • All others 0 °C to 40 °C
    • Derate 2 % per degree °C to 50 °C

    Relative humidity

    • to 95 %, noncondensing

    Operating Altitude

    • 1000 m (derate 1 %/100 m above), max 4800 m

    Standards compliance/ certification

    • cULus (UL508 , CSA 22.2 No. 14)
    • CE Certified, ABS, Lloyds, other local standards

    Display

    • 144 mm QVGA TFT 64k-color touchscreen

     



    Benefits

     Flexible and scalable:

      • All types of harmonic producing loads
      • Single load, bus or global site filtering
      • Compatible with future load changes
    • Easy sizing and independent of system impedance
    • Simple selection online tool
    • Simple installation and ease of expansion
    • Flexible parallel operation modes for multi-unit installations
    • Current transformers can be installed on the incoming mains (source sense) or on the feeders to the loads (load sense) for maximum installation flexibility
    • Peace of mind:
      • Achieves compliance with any harmonic standard anywhere around the world when sized correctly
      • Compatible with generator sources - off loads generators of reactive and harmonic current demands to extend life and ensure proper operation of generators
      • Compatible with UPS sources: relieves UPS of reactive and harmonic current demands to ensure proper operation of UPS
      • Ensures energy efficiency by optimising transformer and cable capacities; reduces utility power factor penalties; and saves the cost of generation and transmission of reactive and harmonic current (non active currents)
      • Maximises up time when used for harmonic and/or power factor correction.

    Applications

     

    • Anywhere nonlinear loads are present: water/wastewater facilities, HVAC systems, oil & gas platforms, petrochemical plants, port cranes, mining, pharmaceuticals, pulp & paper, automotive plants, all-electric ships, wind mill and solar farms, steel mills, plastic extrusion plants, and more.
    • Stop voltage sags and flicker due to load current fluctuations (VAR compensation): Ball mills, shredders, arc welders, arc furnaces, hard to start AC motors, and more.

EcoStruxure™ for Your Business

EcoStruxure lets you thrive in today's digital world. Make better business decisions with scalable and converged IT/OT solutions.

Reach Us

Have a question, complaint or is there some feedback you’d like to send us to make your experience with Schneider Electric better?

FAQ

Easily find and share the answer you are looking for from our online FAQ service.

Distributor Locator

A simple tool to locate easily your nearest Schneider Electric distributor.

MySchneider App

Discover our new mySchneider app which offers tailored services, 24/7 self-service, and easy access to expert support and information. Download and register now to get access to recommended services and more.

Need information?

Browse our resource section and find the most useful tools and documents for all our products.
Compare products: /