M1/M1E processor adaptor - 1 Ethernet, 1 Modbus - 50 MHzShow more characteristics
- Reason for Substitution: End of life
- Substitution date: 26 June 2015
Main range of productModicon Momentum automation platform product or component typeM1/M1E processor adaptor conceptTransparent Ready level or classClass B10 software designationConcept version V2.6Modsoft version >= V2.5ProWORX NxT version V2.0ProWORX 32 communication port protocolEthernetModbus processor nameX 86 based (INTEL, AMD) clock frequency50 MHz Complementary web servicesWeb page loader software toolWeb page loaderRack viewerData editor Ethernet serviceI/O scanningModbus TCP messaging discrete I/O processor capacity8192 I/8192 O memory type512 kB flash544 kB RAM memory descriptionProgram memory 18 kB LL984Data 24 kB materialLexan word length16 bit [Us] rated supply voltage5.0 V DC +/-5 % supplyBy Momentum I/O base exact time for 1 Kinstruction1 ms register I/O processor capacity26048 I/26048 O I/O limit processor capacityI/O local on Modbus number of port1 RS4851 Ethernet markingCE net weight0.042 kg Environment protective treatmentTC ambient air temperature for operation0…60 °C ambient air temperature for storage-40…85 °C relative humidity5…96 % without condensation operating altitude2000 m shock resistance<= 15 gn peak 11 ms half sine wave acceleration vibration resistance1 gn0.75 mm d.a product certificationsNema type 250ULCULFM Class 1 Division 2 Packing Units Package 1 Weight0.211 kg Package 1 Height55.000 mm Package 1 width180.000 mm Package 1 Length260.000 mm Contractual warranty Warranty18 months
User guideFormatSizeAdd to My Documents
Software and FirmwareLanguage
FirmwareFormatSizeAdd to My Documentsprp.document.label.format zipSize 5 MBDate 2015/02/25Files in documentbin192 KBzip299.2 KBbin488 KBbin488 KBtxt4.7 KBbin488 KBbin488 KBbin488 KBbin192 KBbin488 KBbin488 KBbin488 KBbin488 KBDescriptionThis 984LL firmware can be installed on any of the following Momentum PLCs:171CCC96020 (984LL only)171CCC98020 (984LL only)171CCC96030 (IEC or 984LL)171CCC98030 (IEC or 984LL)prp.document.label.format zipSize 4.6 MBDate 2004/07/06Files in documentbin488 KBbin488 KBbin488 KBbin488 KBbin488 KBbin488 KBbin488 KBzip299.2 KBbin488 KBbin488 KBDescriptionExec. v.1.30 (m1ev130.bin)Reference Resolution #199702File M1ev130.zip contains: A document that explains the enhancement features, files for Proworx NXT and Proworx32, and the firmware (bin file).1) Enhancement: A modification was made to the 984LL Exec version 1.30 that allows users to control the retransmission timer and TCP socket time-out when performing MSTR Read multiple registers and Write multiple register operations. Exec. v.1.28 (m1ev128.bin)Reference Resolution #1905581) Fixes a problem in the web page where the TCP Retry counter would increment every time an MSTR Function Block was activated.2) The PSH flag is no longer set in the SYN or FIN.3) Now responds to a second ARP request.4) If 2 or more MSTRs are programmed in logic, any one of the MSTRs may stop operating for up to 5 minutes before recovering.Exec. v.1.26 (m1ev126.bin)In the 984LL Exec v.1.25, a modification was made to the IO Bus Generic IO Map to change the behavior of Advantys Island operation in the event of an IO point fault. The 984LL Exec v.1.26 removes the changes made to the Exec in v.1.25 so that applications currently using the Generic IO Bus map will be compatible with the latest Execs. This modification for Advantys Island operation on the M1E IO Bus is now accomplished by importing new M1-Advantys mdc files to Concept.Exec. v.1.25 (m1ev125.bin)Reference Resolution #1746431) Resolves an issue where the M1E would not respond to ICMP ping commands when communicating through routers across a WAN.
Technical FAQsNo results foundUnfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.