M1/M1E processor adaptor - 1 Modbus - 20 MHzShow more characteristics
- Reason for Substitution: End of life
- Substitution date: 26 June 2015
Main range of productModicon Momentum automation platform product or component typeM1/M1E processor adaptor software designationConcept version V2.6Modsoft version >= V2.5ProWORX NxT version V2.0ProWORX 32 communication port protocolModbus processor nameX 86 based (INTEL, AMD) clock frequency20 MHz Complementary discrete I/O processor capacity2048 I/2048 O memory type256 kB flash64 kB RAM memory descriptionProgram memory 2.4 kB LL984Data 2 kB materialLexan word length16 bit [Us] rated supply voltage5.0 V DC +/-5 % supplyBy Momentum I/O base exact time for 1 Kinstruction1 ms register I/O processor capacity2048 I/2048 O number of port1 RS232C non isolated markingCE net weight0.042 kg Environment protective treatmentTC ambient air temperature for operation0…60 °C ambient air temperature for storage-40…85 °C relative humidity5…96 % without condensation operating altitude2000 m shock resistance<= 15 gn peak 11 ms half sine wave acceleration vibration resistance0.75 mm d.a1 gn product certificationsULCULFM Class 1 Division 2Nema type 250 Packing Units Package 1 Weight0.206 kg Package 1 Height55.000 mm Package 1 width180.000 mm Package 1 Length260.000 mm Contractual warranty Warranty18 months
User guideFormatSizeDateAdd to My Documents
Software and FirmwareLanguage
FirmwareFormatSizeDateAdd to My Documentsprp.document.label.format zipSize 1.3 MBDate 2003/02/27Files in documentbin192 KBbin192 KBbin192 KBbin192 KBbin192 KBbin192 KBbin192 KBDescriptionExec. v.2.07 (m1llv207.bin)1) Fixes a 40xxx register value setting to zero on a start command.Exec. v.2.06 (m1llv206.bin)1) Minimum Exec. required for M1 171CCS76000 processors at PV02.Exec. v.2.05 (m1llv205.bin)1) Fixes problem in Exec. v.2.04 where M1 would not go into Run.2) The processor will not go into a not configured state after a power cycle if a battery low condition exists (less than 2.68 volts). 3) Fixes XMIT Function Block operation over 2-wire RS485.Exec. v.2.04 (m1llv204.bin)EXEC. v.2.04 WILL NOT WORK IN M1 PROCESSORS. Putting a program into Run mode causes the Run LED to flash in a pattern of 4. It has been removed from the Exec. listing. Refer to Resolution #1096.Exec. v.2.03 (m1v203.bin) 1) Allows the I/O Bus to be more tolerant of PCP devices (example:ATV58) on the network. Exec. v.2.02 (m1exv202.bin) 1) Changes the response of 4 bi-directional IO Bases in the event of an output fault 2) Allows IO Bus network fault monitoring. Exec. v.2.01 (m1ev201.bin) 1) Fixes M1 processors failing with stopped error code 4 when doing online programming changes. Exec. v.2.00 (m1exe200.bin) 1) The XMIT function block is included in the exec. 2) Allows ASCII read & write
Technical FAQsNo results foundUnfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.