M1/M1E processor adaptor - 1 Modbus, 1 I/O bus - 20 MHzShow more characteristics
Main range of productModicon Momentum automation platform product or component typeM1/M1E processor adaptor software designationConcept version V2.6Modsoft version >= V2.5ProWORX NxT version V2.0ProWORX 32 communication port protocolModbus processor nameX 86 based (INTEL, AMD) clock frequency32 MHz Complementary discrete I/O processor capacity2048 I/2048 O memory type256 kB flash256 kB RAM memory descriptionProgram memory 12 kB LL984Program memory 160 kB IECData 4 kB materialLexan word length16 bit [Us] rated supply voltage5.0 V DC +/-5 % supplyBy Momentum I/O base exact time for 1 Kinstruction1 ms register I/O processor capacity4096 words total I/O limit processor capacity8192 bits max I/O words/drop128 I/O Concept80 I/O ProWORX number of port1 I/O bus1 RS232C non isolated markingCE net weight0.042 kg Environment protective treatmentTC ambient air temperature for operation0…60 °C ambient air temperature for storage-40…85 °C relative humidity5…96 % without condensation operating altitude2000 m shock resistance<= 15 gn peak 11 ms half sine wave acceleration vibration resistance1 gn0.75 mm d.a product certificationsFM Class 1 Division 2CULNema type 250UL Packing Units Package 1 Weight0.206 kg Package 1 Height55.000 mm Package 1 width180.000 mm Package 1 Length260.000 mm Contractual warranty Warranty18 months
User guideFormatSizeAdd to My Documents
Software and FirmwareLanguage
FirmwareFormatSizeAdd to My Documentsprp.document.label.format zipSize 1.3 MBDate 2008/10/15Files in documentbin192 KBbin192 KBbin192 KBbin192 KBbin192 KBbin192 KBbin192 KBDescriptionExec. v.2.07 (m1llv207.bin)1) Fixes a 40xxx register value setting to zero on a start command.Exec. v.2.06 (m1llv206.bin)1) Minimum Exec. required for M1 171CCS76000 processors at PV02.Exec. v.2.05 (m1llv205.bin)1) Fixes problem in Exec. v.2.04 where M1 would not go into Run.2) The processor will not go into a not configured state after a power cycle if a battery low condition exists (less than 2.68 volts). 3) Fixes XMIT Function Block operation over 2-wire RS485.Exec. v.2.04 (m1llv204.bin)EXEC. v.2.04 WILL NOT WORK IN M1 PROCESSORS. Putting a program into Run mode causes the Run LED to flash in a pattern of 4. It has been removed from the Exec. listing. Refer to Resolution #1096.Exec. v.2.03 (m1v203.bin) 1) Allows the I/O Bus to be more tolerant of PCP devices (example:ATV58) on the network. Exec. v.2.02 (m1exv202.bin) 1) Changes the response of 4 bi-directional IO Bases in the event of an output fault 2) Allows IO Bus network fault monitoring. Exec. v.2.01 (m1ev201.bin) 1) Fixes M1 processors failing with stopped error code 4 when doing online programming changes. Exec. v.2.00 (m1exe200.bin) 1) The XMIT function block is included in the exec. 2) Allows ASCII read & write
Technical FAQsNo results foundUnfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.