Main range of productHarmony XB4 product or component typeComplete emergency stop push-button device short nameXB4 bezel materialChromium plated metal fixing collar materialZamak head typeStandard mounting diameter22 mm sale per indivisible quantity1 dust zoneZone 21 - 22 type of operatorTrigger action and mechanical latching resetTurn to release operator profileRed mushroom Ø 40 mm contacts type and composition1 NO + 1 NC Complementary device mountingFixing hole Ø 22.5 mm (22.3 +0.4/0) fixing center>= 30 x 40 mm on support panel fixing modeScrew-fixed recommended torque: 0.8...1.2 N.m embedding depth43 mm markingEx tb IIIC shape of signaling unit headRound contact operationSlow-break contacts usageStandard positive openingWith conforming to EN/IEC 60947-5-1 : appendix K operating travel1.5 mm (NC changing electrical state)4.3 mm (total travel) mechanical durability300000 cycles connections - terminalsScrew clamp terminals, clamping capacity: <= 2 x 1.5 mm² with cable end conforming to EN 60947-1Screw clamp terminals, clamping capacity: >= 1 x 0.22 mm² without cable end conforming to EN 60947-1 tightening torque0.8...1.2 N.m conforming to EN 60947-1 shape of screw headCross head compatible with Philips no 1 screwdriverCross head compatible with pozidriv No 1 screwdriverSlotted head compatible with flat Ø 4 mm screwdriverSlotted head compatible with flat Ø 5.5 mm screwdriver contacts materialSilver alloy (Ag/Ni) short-circuit protection10 A cartridge fuse type gG conforming to EN/IEC 60947-5-1 [Ith] conventional free air thermal current10 A conforming to EN/IEC 60947-5-1 [Ui] rated insulation voltage600 V (degree of pollution: 3) conforming to EN 60947-1 [Uimp] rated impulse withstand voltage6 kV conforming to EN 60947-1 [Ie] rated operational current3 A at 240 V AC-15, A600 conforming to EN/IEC 60947-5-16 A at 120 V AC-15, A600 conforming to EN/IEC 60947-5-10.1 A at 600 V DC-13, Q600 conforming to EN/IEC 60947-5-10.27 A at 250 V DC-13, Q600 conforming to EN/IEC 60947-5-10.55 A at 125 V DC-13, Q600 conforming to EN/IEC 60947-5-11.2 A at 600 V AC-15, A600 conforming to EN/IEC 60947-5-1 electrical durability1000000 cycles AC-15, 2 A at 230 V, operating rate: <= 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 : appendix C1000000 cycles AC-15, 3 A at 120 V, operating rate: <= 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 : appendix C1000000 cycles AC-15, 4 A at 24 V, operating rate: <= 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 : appendix C1000000 cycles DC-13, 0.2 A at 110 V, operating rate: <= 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 : appendix C1000000 cycles DC-13, 0.5 A at 24 V, operating rate: <= 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 : appendix C customizableNo Environment protective treatmentTH ambient air temperature for operation-40...70 °C overvoltage categoryConforming to IEC 60536 IP degree of protectionIP69IP66 conforming to IEC 60529IP69K IK degree of protectionIK06 standardsEN 61000-6-2EN 60079-0 : 2009EN 60079-31 : 2009IEC 60079-0 : 2007IEC 60079-31 : 2008EN/IEC 60947-5-5EN/ISO 13850 directives94/9/EC - ATEX directive product certificationsINERIS 04ATEX9004U vibration resistance5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6 shock resistance30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-2750 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27 Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profileAvailable Product end of life instructionsNeed no specific recycling operations
Documents and DownloadsLanguage
No results foundUnfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsEmergency Stop Pushbuttone :clamping thickness: 1 to 6 mm / 0.04 to 0.24 in.
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
Connection by Faston Connectors(1)Diameter on finished panel or support(2)40 mm min. / 1.57 in. min.(3)30 mm min. / 1.18 in. min.(4)Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm 0+0.4 / 0.88 in. 0+0.016)(5)45 mm min. / 1.78 in. min.(6)32 mm min. / 1.26 in. min.