Main range of productHarmony XB4 product or component typeHead for illuminated double-headed push-button product compatibilityIntegral LED device short nameZB4 bezel materialChromium plated metal head typeStandard mounting diameter22 mm sale per indivisible quantity1 shape of signaling unit headRectangular type of operatorSpring return operator profile1 flush - 1 projecting push-buttons - 1 central pilot light operators descriptionGreen ''I'' - red ''O'' Complementary CAD overall width30 mm CAD overall height50 mm CAD overall depth30 mm product weight0.056 kg resistance to high pressure washer7000000 Pa at 55 °C,distance: 0.1 m colour of markingBlack marking when white capsWhite marking when green, red or black caps operator profileGreen flush, white IRed projecting, white O mechanical durability1000000 cycles electrical composition codeM1 for <= 6 contacts using single blocks in front mounting with integral LEDM2 for <= 6 contacts using single and double blocks in front mounting with integral LEDM10 for <= 2 contacts using single blocks in front mounting with integral LEDM6 for <= 2 contacts using single blocks in front mounting with integral LED and transformer Environment protective treatmentTH ambient air temperature for storage-40...70 °C ambient air temperature for operation-40...70 °C electrical shock protection classClass I conforming to IEC 61140 IP degree of protectionIP69 conforming to IEC 60529IP66 conforming to IEC 60529IP69K NEMA degree of protectionNEMA 13NEMA 4X IK degree of protectionIK06 conforming to IEC 50102 standardsEN/IEC 60947-1EN/IEC 60947-5-1EN/IEC 60947-5-4EN/IEC 60947-5-5JIS C 4520UL 508CSA C22.2 No 14 product certificationsBVCSADNVGLLROS (Lloyds register of shipping)RINAUL listed vibration resistance5 gn (f = 2...500 Hz) conforming to IEC 60068-2-6 shock resistance(duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-27(duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27 Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
No results foundUnfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensionsWithout BootWith Boot ZBA710
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
Connection by Faston Connectors(1)Diameter on finished panel or support(2)40 mm min. / 1.57 in. min.(3)30 mm min. / 1.18 in. min.(4)Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm 0+0.4 / 0.88 in. 0+0.016)(5)45 mm min. / 1.78 in. min.(6)32 mm min. / 1.26 in. min.Pushbuttons, Switches and Pilot Lights for Printed Circuit Board ConnectionPanel Cut-outs (Viewed from Installer’s Side)A:30 mm min. / 1.18 in. min.B:40 mm min. / 1.57 in. min.Printed Circuit Board Cut-outs (Viewed from Electrical Block Side)
Dimensions in mmA:30 mm min.B:40 mm min.
Dimensions in in.A:1.18 in. min.B:1.57 in. min.General Tolerances of the Panel and Printed Circuit Board
The cumulative tolerance must not exceed 0.3 mm / 0.012 in: T1 + T2 = 0.3 mm max.Installation Precautions
Minimum thickness of circuit board: 1.6 mm / 0.06 in.
Cut-out diameter: 22.4 mm ± 0.1 / 0.88 in. ± 0.004
Orientation of body/fixing collar ZB4 BZ009: ± 2°30’ (excluding cut-outs marked a and b).
Tightening torque of screws ZBZ 006: 0.6 N.m (5.3 lbf.in) max.
Allow for one ZB4 BZ079 fixing collar/pillar and its fixing screws:
every 90 mm / 3.54 in. horizontally (X), and 120 mm / 4.72 in. vertically (Y).
with each selector switch head (ZB4 BD•, ZB4 BJ•, ZB4 BG•).
The fixing centers marked a and b are diagonally opposed and must align with those marked 4 and 5.(1)Panel(2)Printed circuit boardMounting of Adapter (Socket) ZBZ 01•
1 2 elongated holes for ZBZ 006 screw access
2 1 hole Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 for centring adapter ZBZ 01•
3 8 × Ø 1.2 mm / 0.05 in. holes
4 1 hole Ø 2.9 mm ± 0.05 / 0.11 in. ± 0.002, for aligning the printed circuit board (with cut-out marked a)
5 1 elongated hole for aligning the printed circuit board (with cut-out marked b)
6 4 holes Ø 2.4 mm / 0.09 in. for clipping in adapter ZBZ 01•
Dimensions An + 18.1 relate to the Ø 2.4 mm ± 0.05 / 0.09 in. ± 0.002 holes for centring adapter ZBZ 01•.
Technical DescriptionElectrical Composition Corresponding to Codes M1 and M7Electrical Composition Corresponding to Codes M2 and M8Electrical Composition Corresponding to Codes M6 and P2Electrical Composition Corresponding to Codes M5, M10, MF1, MR1 and MF2Legend