How to configure the Momentum to start in RUN mode after a power cycle using Modsoft
Issue
How to configure a Momentum start in 'RUN' mode after a power cycle using Modsoft.
Product Line
All Momentum PLC's.
Environment
Windows 7
Resolution
In order for the Momentum to start in RUN mode after power cycle, the program must be saved to the built-in flash.
The following steps can be used to accomplish this in 'Modsoft version 2.62.
- Click Online\ Direct To PLC.
- Press F2 'PlcOps'.
- Press F2 to 'Stop the PLC'.
- Press F8 'Save To'.
- Type in Y for answering the question (Continue Power Down Run State?).
- Type in Y for 'Continue'.
- Press F1 to 'Start the PLC'.
- Disconnect from the PLC.
- Power cycle the PLC and it will start back up in RUN mode.
Released for: Schneider Electric United Arab Emirates
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales enquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Centre
Find support resources for all your needs, in one place.