Technical FAQs

Ask a Question

How to get Vijeo Designer and Vijeo Designer Runtime version information on Magelis XBT G/GT terminal during runtime.
System configuration menu item can be used to display VJD & VJD Runtime version information during runtime of the Magelis XBT G/GT terminal during...
What is the maximum motor cable length allowed between the Sinus Filter and Altivar 71 Drive.
The maximum motor cable length allowed between the Sinus Filter and Altivar 71 Drive is 1000 Meters.
Can the Fault History queue in the Altivar 61/71 Drives be reset.
The Fault History is important for the Troubleshooting and Fault traceability during Drive repair. Thus facility has not been provided for clearing...
When does the INF3 (Internal Serial Link) fault occur in Altivar 61/71 Drive.
The Internal Serial Link Fault (INF3) occurs in Altivar 61/71 Drives when the 24VDC internal power supply is disturbed, causing the reset of microprocessor....
How to join two strings with result more than 16 characters in Unity Pro.
By default the maximum characters allowed for the STRING data type is only 16. It can be increased to 65534 ASCII characters.   For this select the...
What is the broadcast address in terms of Ethernet network.
A broadcast address is an IP address that is used to target all systems on a specific subnet network instead of single hosts.   In other words broadcast...
What is the difference between ModSoft PID function and Concept PID function.
The difference between ModSoft PID and Concept PID loops are as follows:  PID (ModSoft):                                                                  ...
Which Modbus functions are used for reading/writing multiple data on IO scanning in Modicon Quantum range.
In Modicon Quantum range, I/O scanning works with following Modbus function codes:   FC3 for Reading Multiple 4X registers. FC16 for Writing Multiple...
How to convert DINT variable to REAL variable in Concept (with IEC disabled).
In order to convert DINT variable to REAL variable in Concept (with IEC disabled) make use of EMTH-CNVIF instruction.
What is the maximum motor cable length allowed for Altivar 11 Drive.
The maximum motor cable length allowed for Altivar 11 Drive is as follows:  50 meters -- Shielded cable  100 meters -- Non-Shielded cable
Results 81 - 90 of 100