How configure VMWare in mode NAT and SoMachine for M251 communication via ETH 2 port
Use the following method with the VMWare configured in NAT mode:
1. Configure SoMachine the communication via "active path":
2.In the Communication Settings window , add a gateway and use the IP address of the physique PC.
3.Select the new gateway and Scan it
4. Now you can connect to the M251
1. Configure SoMachine the communication via "active path":
2.In the Communication Settings window , add a gateway and use the IP address of the physique PC.
3.Select the new gateway and Scan it
4. Now you can connect to the M251
Released for: Schneider Electric Belgium
Need help?
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.