Is it possible to configure one port on the HMIGTU to communicate with a PLC on one subnet, and the other port to communicate to a PLC on a different subnet?
Issue:
Can the HMIGTU communicate to devices on two different subnets?
Product Line:
HMIGTU
Resolution:
It is possible for an Magelis HMIGTU (HMIG3U or HMIG5U) to communicate to two PLC's on a different subnets.
I have attached a screen capture on how you would configure Vijeo Designer. The Runtime will automatically route the device to the Ethernet port on the correct subnet.
Can the HMIGTU communicate to devices on two different subnets?
Product Line:
HMIGTU
Resolution:
It is possible for an Magelis HMIGTU (HMIG3U or HMIG5U) to communicate to two PLC's on a different subnets.
I have attached a screen capture on how you would configure Vijeo Designer. The Runtime will automatically route the device to the Ethernet port on the correct subnet.
Released for: Schneider Electric Belgium
Need help?
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.