What causes an InF7 or internal error 7 on the ATV630 and ATV930 Process drives?
Issue:
ATV630 and ATV930 have an INF7 (Internal Error 7) and will not run.
Product Line:
ATV600 and ATV900 series drives.
Environment:
All models, All serial numbers.
Cause:
Abnormal operation.
Resolution:
Internal Error 7 is caused by a communication interruption with CPLD component of the Control board. Cycle power to reset this fault. If the problem returns, please contact Schneider Electric Technical Support at 888-778-2733 for further assistance.
ATV630 and ATV930 have an INF7 (Internal Error 7) and will not run.
Product Line:
ATV600 and ATV900 series drives.
Environment:
All models, All serial numbers.
Cause:
Abnormal operation.
Resolution:
Internal Error 7 is caused by a communication interruption with CPLD component of the Control board. Cycle power to reset this fault. If the problem returns, please contact Schneider Electric Technical Support at 888-778-2733 for further assistance.
Released for: Schneider Electric Belgium
Need help?
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.