How to upload and convert a Modicon Micro 110CPU612xx Modsoft application to Unity.

Use the following steps to upload the application using Modsoft:

• Start Modsoft.
• Click on Transfer
• Select 'PLC to File'.
• Select 'New Program'.

• Type in a filename.
• Hit ENTER

• Type in a location for saving the application or just use the default location.
• Hit ENTER

• Type in the Modbus address.
• Hit Enter.

• Select the Modbus I

• Select RTU for the mode.

• Select Even for the parity

• Select the Stop Bit.

• Select the baud rate.

• Select the appropriate COM port on the PC.
• Wait for the upload to finish.
• Save the changes.

• Start
• Open the application with Unity using the 'Modsoft projects' selection.
• Save the Unity application.

• Select the PLC type to convert to:
• Click on OK.

Released for: Schneider Electric Belgium