Does the M340 Can-Open master detects the presence of the devices which are not configured?
The answer is yes:
This behavior is part of the bootup procedure specified in the standard "CiA302".
At the end of the bootup procedure, after all expected slaves have got their configuration data, a "start all nodes" command is sent by the master.
So each devices connected to the network are identified.
This behavior is part of the bootup procedure specified in the standard "CiA302".
At the end of the bootup procedure, after all expected slaves have got their configuration data, a "start all nodes" command is sent by the master.
So each devices connected to the network are identified.
Released for: Schneider Electric Belgium
Need help?
Get a Quote
Start your sales inquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.