This FAQ has been written for NEAL (North East Africa and Levant) region. If you are looking for information for another region, please select the correct country from the top-left dropdown in the page and 'Navigate to Browse FAQs' in the Support menu.
Some types of electrical and electromagnetic interference caused by the network or its environment may affect the operation of earth leakage protection devices and causes their tripping without existence of fault ,which is known by Nuisance tripping (tripping in a non-dangerous situation).
This type of tripping is caused by :
1-A transient or continuous high-frequency voltage that is superimposed on the normal network voltage (50 Hz).
2-High-frequency harmonics
3-Low-frequency continuous leakage currents
4-Switching capacitive or inductive components
5-Common mode voltage surges
Type SI RCDs have been designed to avoid nuisance tripping or non-tripping in case of polluted network, lightning effect, high frequency currents, RF waves, etc.
This type of tripping is caused by :
1-A transient or continuous high-frequency voltage that is superimposed on the normal network voltage (50 Hz).
2-High-frequency harmonics
3-Low-frequency continuous leakage currents
4-Switching capacitive or inductive components
5-Common mode voltage surges
Type SI RCDs have been designed to avoid nuisance tripping or non-tripping in case of polluted network, lightning effect, high frequency currents, RF waves, etc.
Released for: Schneider Electric Egypt and North East Africa
Need help?
Product Selector
Quickly and easily find the right products and accessories for your applications.
Get a Quote
Start your sales enquiry online and an expert will connect with you.
Where to buy?
Easily find the nearest Schneider Electric distributor in your location.
Help Center
Find support resources for all your needs, in one place.
