Main range of productModicon Quantum automation platform product or component typeSafety dc discrete input module Complementary discrete input number16 group of channels1 logic inputPositive (sink) discrete input voltage24 V DC voltage state 1 guaranteed11...30 V DC voltage state 0 guaranteed-3...5 V DC current state 1 guaranteed>= 3 mA current state 0 guaranteed<= 1.5 mA sensor power supply19.2…30 V addressing requirement7 input words input impedance3675 Ohm absolute maximum input30 V response time<= 25 ms from state 0 to state 1<= 25 ms from state 1 to state 0 protection typeBy internal rectifier associated fuse rating1 A, fast blow power dissipation2.75 W + (0.25 x number of points on) isolation between group and bus1500 Vrms for 1 minute checksDiagnostic of internal channel faultSystem failureBroken wire detection local signalling1 LED (green)bus communication is present (Active): 1 LED (red)external fault detected (F): 16 LEDs (green)input status: 16 LEDs (red)system failure, diagnostic of internal channel fault: markingCE bus current requirement550 mA Environment product certificationsCSAULTÜV Rheinland (SIL2)CSA HazLoc Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueFormatSizeAdd to My DocumentsUser guideFormatSizeAdd to My Documentsprp.document.label.format pdfSize 5.7 MBDate 12/1/18DescriptionThis documentation is a reference for the discrete and analog I/O hardware of the Quantum automation system with EcoStruxure™ Control Expert.prp.document.label.format pdfSize 2.2 MBDate 10/1/17DescriptionThis Safety Reference Manual describes the Quantum Safety PLC with special |regard to how it meets the Safety requirements of the IEC 61508. It provides detailed information on how to install, run, and maintain the system correctly in order to protect human beings as well as to prevent damage to environment, equipment, and production. |This documentation is intended for qualified personnel familiar with Functional Safety and Unity Pro. Commissioning and operating the Quantum Safety PLC may only be performed by persons who are authorized to commission and operate systems in accordance with established Functional Safety standards.CertificateFormatSizeAdd to My Documentsprp.document.label.format zipSize 343.5 KBDate 12/17/19prp.document.label.format zipSize 3.8 MBDate 9/9/17Instruction sheetFormatSizeAdd to My DocumentsChina RoHS declarationFormatSizeAdd to My DocumentsDeclaration of conformityFormatSizeAdd to My DocumentsEnd of Life InformationFormatSizeAdd to My DocumentsEU RoHS DeclarationFormatSizeAdd to My DocumentsMarine certificateFormatSizeAdd to My Documentsprp.document.label.format pdfSize 181.4 KBDate 1/11/19DescriptionMerchant navies Installation Instructionsprp.document.label.format pdfSize 400 KBDate 5/22/18DescriptionBureau Veritas - marine certificate for QUANTUM PLCsprp.document.label.format pdfSize 2.3 MBDate 10/9/17DescriptionAmerican Bureau of Shipping marine certificate for Quantum automation platformprp.document.label.format pdfSize 2.6 MBDate 12/29/16DescriptionRussian Maritime Register of ShippingProduct Environmental ProfileFormatSizeAdd to My Documents
- All Languages22
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsRacks for Modules MountingDimensions of Modules and Racks(1)2 slots(2)3 slots(3)4 slots(4)6 slots(5)10 slots(6)16 slots
Connections and Schema24 Vdc 16-Channel Digital Input ModuleWiring Diagramfuse:1 A fast blowpull-up resistor (in sensor example):15 kOhm
NOTE: There is only one group of 16 inputs. All common 24 V are internally connected and all common 0 V are also internally connected. The two pins of a same input (e. g: pin 1 and 2 for input 1) are internally connected too so that you can use either the right pin or the left one.