How does the LUFV2 work?
Issue:
Installing LUFV2 Motor Load Indication with a Tesys U-Line starter
Product line:
Tesys U-Line
Environment:
LUFV2
Cause:
n/a
Resolution:
This unit requires a separate 24VDC power supply.
The feedback signal is 4-20mA and follows 4mA at zero current to 20mA at two times the Control Unit rated current.
For example with the LUCA12FU (rated current 3 to 12 Amps). The output from the module is 4mA at 0 amps and 20mA at 24 amps.
Installing LUFV2 Motor Load Indication with a Tesys U-Line starter
Product line:
Tesys U-Line
Environment:
LUFV2
Cause:
n/a
Resolution:
This unit requires a separate 24VDC power supply.
The feedback signal is 4-20mA and follows 4mA at zero current to 20mA at two times the Control Unit rated current.
For example with the LUCA12FU (rated current 3 to 12 Amps). The output from the module is 4mA at 0 amps and 20mA at 24 amps.
Diterbitkan untuk: Schneider Electric Indonesia
Perlu bantuan?
Pemilih produk
Temukan produk dan aksesoris yang tepat untuk aplikasi Anda secara cepat dan mudah.
Dapatkan Penawaran Harga
Silakan kirimkan pertanyaan terkait penjualan secara online dan pakar kami akan menghubungi Anda.
Tempat pembelian
Temukan distributor Schneider Electric terdekat di lokasi Anda dengan mudah.
Pusat Bantuan
Temukan sumber daya dukungan untuk seluruh kebutuhan Anda, di satu tempat.