How to diagnose line break for BMXART0814/0414 at mV ranges ?
Issue
How to diagnose line break for BMXART0814/0414 at mV ranges ?
Product Line
X80
Environment
Control Expert
Resolution
BMXART0814/0414 modules have the interface to enable/disable the broken wire detection function for thermocouple or thermoprobe signals as below .
User is able to monitor the broken wire through channel and module Error lights at mv range. Module variables listed below could be used to indicate wire broken status in PLC application .
I/O data type : Device DDT
When the channel selected to +/- mV , CH_HEALTH in Device DDT will report error in case of broken wire.
I/O data type : Topological
Variables CH_ERROR, CH_FLT, SENSOR_FLT in IODDT could indicate the broken wire error and function block READ_STS could be implemented to read above exact channel status.
Diterbitkan untuk: Schneider Electric Indonesia
Perlu bantuan?
Pemilih produk
Temukan produk dan aksesoris yang tepat untuk aplikasi Anda secara cepat dan mudah.
Dapatkan Penawaran Harga
Silakan kirimkan pertanyaan terkait penjualan secara online dan pakar kami akan menghubungi Anda.
Tempat pembelian
Temukan distributor Schneider Electric terdekat di lokasi Anda dengan mudah.
Pusat Bantuan
Temukan sumber daya dukungan untuk seluruh kebutuhan Anda, di satu tempat.