FS polyester enclosures & accessories
- Parts of the body, rear panels and doors are made from fiber glass reinforced polyester, moulded by hot compression, RAL7032 colour. Same finish for all surfaces.
- Bosses for fixation points are moulded.
- 4 versions of enclosures :
- Totally closed, IP65.
- Open bottom and integrated plinth, IP54.
- Open upper part for ventilation, IP44.
- Open bottom and plinth, and open upper part for ventilation, IP44.
- Accessory to upgrade IP44 to IP54.
- 40 dimensions from 500x500x320mm up to 1500x1250x420mm.
- 1 door, 500 and 750mm width, and 2 doors, 1000 and 1250mm width.
- 2 doors enclosures constructed with reinforcement central part.
- 3 types of panels or doors: plain, ribbed surface for antiflyposting, glazed.
- Lock or handle with locks, with 2 or 4 action points out of the protected volume.
- Impact resistance: IK10 for plain and ribbed door version, IK08 for the glazed door.
- Self- extinguishibility: HB40 classified and 960º test withstanding.
- Certification of compliance with IEC62208 enclosure standard.
- Polyester plinth ZA 200 mm, stackable 2x200mm, for PLA enclosures, closed bottom versions
- Polyester plinth ZZ 200 mm and 500 mm for PLA enclosures, open bottom versions
- UL/CUL certification, (depending on the version)
- NSYPLA- Certified
- NSYPLAT, NSYPLAZ and NSYPLAZT- Not certified
Enclosures Spare Parts
Schneider Electric selected a wide variety of spare parts for your enclosure. No matter if the enclosure is recently built or has several years, you can have the replacement parts you need.