Our Brands

Impact-Company-Logo-English Black-01-177x54

Welcome to the Schneider Electric Website

Welcome to our website.
		
Which is the default user and password for the Modicon M172?

If it is the first time you connect to the Modicon M172 via USB cable and the EcoStruxure Machine Expert HVAC asks you for credentials you will need to use this: User: administrator Password:...

What is LSC (loss of service continuity category)

LSC stands for: Loss of Service Continuity category The IEC 62271-200 proposes user-oriented definitions and classifications intended to describe how a given switchgear can be accessed, and what will...

What is the configuration software for Lexium 05?

The configuration software for Lexium 05 servo drives was called Powersuite. The part number of the PowerSuite software is VW3A8104 and there are two options for connecting a PC to the drive. Option...

Software - Where to download Vijeo Designer v5.0 (installer)?

Please find in this FAQ the files to download the installer of Vijeo Designer v5.0. Note: This software has been replaced by Vijeo Designer v6.2.

Which is the software used to program the Harmony ST6 and Harmony STM6...

The software to program the Harmony ST6 range is EcoStruxure Operator Terminal Expert (former Vijeo XD ). The software can be download from the next link: EcoStruxure™ Operator Terminal Expert |...

What are the tripping curves for the NSX breakers?

These are available in the full catalogue "Compact NSX" See link below: ComPacT NSX & NSXm Circuit Breakers and Switch Disconnectors from 16 to 630A up to 690V - 2024 Catalogue |...

What is the wiring scheme for a Direct on line (DOL) starter when...

There are a number of issues: We do not manufacture a complete starter specifically for single phase motors but our 3 phase starters can be wired for single phase applications. Relative to their...

PowerLogic PM5000 Series (PM51xx, PM53xx, PM55xx, PM56xx) Modbus Register...

Issue Register list for Modbus communication Product Line PM5110, PM5330, PM5340, PM5560, PM5563, PM56xx, PM57xx Environment Power Meter Communications Modbus Register List Cause PM5000 series...

Show more
Popular Video FAQsPopular Videos
Show more
Learn more through our General Knowledge FAQsGeneral Knowledge
How can I cable to the PNP and NPN type outputs for sensors / detectors,...

PNP and NPN type outputs are available as 3-wire sensors with a DC voltage power supply (the voltage limits are dependent on the specific sensor): PNP type: switching on the positive voltage load NPN...

Which is the software to program the Modicon M171O (Optimized)?

The software to program the Modicon M171O (optimized) is EcoStruxure Machine Expert HVAC. The software can be downloaded from our website:...

How to identify the M172 that I am using in the program?

In order to identify in our code which M172 model we are using we need to use the two (2) internal variables located in "Operators and blocks". The variables are Par_POLI (Polycarbonate...

What are the differences between snap-action and slow-break contacts in...

Note we no longer sell limit switches so the information given below is for information purposes only. You may still be able to buy Telemecanique limit switches (and some 9007 etc. ex-Schneider...

How does the "Dead man's switch" or "Dead man's handle" position work on a...

Please note that we no longer sell joysticks, so this FAQ is for information only. Technological description The handle grip comprises a fixed part (lower section) and a moving part (upper section)....

What is the difference between PNP and NPN when describing 3 wire...

Most industrial proximity sensors (inductive, capacitive, ultrasonic and photo electric) are solid state. The term solid state refers to the type of components used within the sensor. Solid state...

What size overload do I use with a star delta starter ?

In the majority of cases, the overload of a star delta starter is fitted below the delta contactor with wiring connections to one side of each of the motor windings. The other side of the windings...

What are the differences between 220VAC, 230VAC and 240VAC Mains Supplies...

For many years, mainland Western Europe has used a mains electricity supply rated at nominally 220VAC 50Hz while the UK used 240VAC 50Hz. In 1994, the European Union state members decided to proceed...

Show more
  • Products Documentation
  • Software Downloads
  • Product Selector
  • Product Substitution and Replacement
  • Help and Contact Centre
  • Find our Offices
  • Where to buy
  • Schneider Electric Community
  • Careers
  • Company Profile
  • Report a misconduct
  • Accessibility
  • Newsroom
  • Investors
  • EcoStruxure
  • Job Search
  • Blog
  • Privacy Policy
  • Cookie Notice
  • Terms of use
  • Change your cookie settings