Why is the IP address resetting back to all zeros when I power cycle the ATV71 with an VW3A3316 ethernet IP card?
Issue:
ATV71 drive equipped with VW3A3316 Ethernet IP card. The IP address and Subnet mask return to 0.0.0.0 when power is cycled. IP mode is set to Fixed.
Product Line:
Altivar 61 and Altivar 71 series drives
Environment:
All models that are equipped with option card VW3A3316 Ethernet IP Card, All serial numbers.
Cause:
IP address and Subnet Mask address should persist through a power cycle when IP Mode is set to fixed, but they reset to 0.0.0.0 after a power cycle.
Resolution:
If parameter Forced Local Assignment is assigned to a logic input and is active, this can cause the IP address and subnet mask to be reset to factory default of 0.0.0.0 when power is cycled. Insure that this parameter under menu 1.9, Communications, is not assigned to a logic input when using the VW3A3316 option card.
ATV71 drive equipped with VW3A3316 Ethernet IP card. The IP address and Subnet mask return to 0.0.0.0 when power is cycled. IP mode is set to Fixed.
Product Line:
Altivar 61 and Altivar 71 series drives
Environment:
All models that are equipped with option card VW3A3316 Ethernet IP Card, All serial numbers.
Cause:
IP address and Subnet Mask address should persist through a power cycle when IP Mode is set to fixed, but they reset to 0.0.0.0 after a power cycle.
Resolution:
If parameter Forced Local Assignment is assigned to a logic input and is active, this can cause the IP address and subnet mask to be reset to factory default of 0.0.0.0 when power is cycled. Insure that this parameter under menu 1.9, Communications, is not assigned to a logic input when using the VW3A3316 option card.
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.