How to add a 170ADO83030 Momentum I/O Base to the Unity Catalog
Issue
This Resolution explains how to add a Momentum I/O base to the pick list in Unity Pro Software versions 8.0 and higher.
Some older Momentum I/O bases were not supported in Unity. Support for these modules can be added by using the Unity Hardware Catalog Manager along with the module CPX file, which will be imported into Unity and added to the pick list.
Product Line
170ADO83030
Environment
Unity Pro V8 and higher
Resolution
There are two files attached to this resolution.
When the import is completed, the module will show up in the picklist as follows:
This Resolution explains how to add a Momentum I/O base to the pick list in Unity Pro Software versions 8.0 and higher.
Some older Momentum I/O bases were not supported in Unity. Support for these modules can be added by using the Unity Hardware Catalog Manager along with the module CPX file, which will be imported into Unity and added to the pick list.
Product Line
170ADO83030
Environment
Unity Pro V8 and higher
Resolution
There are two files attached to this resolution.
- The file, 'Adding IO Bases to the Unity Catalog.pptx', is the procedure to import the CPX file.
- The file, ADO83030.cpx, is the file that will be imported into Unity. (unzip file 'ADO83030 cpx file.7z)
When the import is completed, the module will show up in the picklist as follows:
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.