Issue:
TCT parameter on the Altivar process drive

Product Line:
Altivar Process

Environment:
All models, All serial numbers

Cause:
Documentation

Resoultion:
Complete Settings-> Command and Reference-> 2-wire type

From the main menu, Navigate to "Complete Settings" then "Command and Reference".  From here, you can scroll down to 2/3 wire control, and if it is set to 2 wire, 2-wire control type can be found just below.

If this article does not answer your question, check out our FAQ database that has answers to more commonly asked questions:

Frequently Asked Questions - Schneider Electric (se.com)

If this FAQ did not solve your issue, you can call us at 1-888-778-2733 Option 2 and then 4 or e-mail us at drive.products.support@se.com to create a case with our Technical Support Team.

If you are not located in North America, please contact your local Customer Care Center for assistance:

Support | Schneider Electric Global (se.com)

게시 대상: 슈나이더 일렉트릭 Korea