How to setup the Global Data service on an Unity Momentum 171CBU98091 PLC?
Title
Global Data service on an Unity Momentum 171CBU98091 PLC
Issue
Global Data service on an Unity Momentum 171CBU98091 PLC
Product Line
Unity Momentum
Environment
Control Expert v14 or higher
Cause
N/A
Resolution
Information on setting up the Global Data service on an Unity Momentum 171CBU98091 PLC is available in the Unity Momentum User manual. (Pages 119 to 122 explain the Global Data service setup.)
The basic steps to perform in your program for the Global Data service is to assign a Global Data multicast IP address/Group Name in the Network properties section and configure the global variables properties.
For your Global Data variable you need to select either to PUB (publish) or SUB (subscribe), assigned a Group Name (setup in the network properties section) and enter a unique ID number. (see page 122). The Global Data protocol is a Schneider Electric proprietary capability.
If this FAQ did not solve your issue, you can chat with us at chat with us or e-mail us at customer.services@se.com to create a case with our Technical Support Team.
If you are not located in North America, please contact your local Customer Care Center for assistance:
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.