Unable to use a Unity Momentum I/O Scanner service through a router
Issue
The Unity Momentum PLC could not communicate through a router with its I/O Scanner service.
The PLC could not I/O Scan through a router because it did not ARP for its Gateway Address. This issue was resolved in a firmware fix.
Product Line
171CBU98090
171CBU98091
Resolution
Firmware version affected: 1.0
Issue is resolved in firmware versions:
Patch version 1.1
Released version 1.2 and higher
The Unity Momentum PLC could not communicate through a router with its I/O Scanner service.
The PLC could not I/O Scan through a router because it did not ARP for its Gateway Address. This issue was resolved in a firmware fix.
Product Line
171CBU98090
171CBU98091
Resolution
Firmware version affected: 1.0
Issue is resolved in firmware versions:
Patch version 1.1
Released version 1.2 and higher
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.