Can I display torques as 'Foot Pounds' on the ATV630 / ATV690 series drives?
Issue:
Change unit of torque to "Foot Pounds" on Altivar Process Drives ATV630/930
Product Line:
ATV630, ATV690 series drives.
Environment:
All models with firmware 1.6 or below.
Cause:
Information unavailable in current literature.
Resolution:
Currently, it is not possible to display torque as foot pounds on the ATV630 and ATV930 series drives. This information is current as of firmware release 1.6. An evolution has been created to have this feature added via a future firmware update. There is no ETA for this firmware release.
Change unit of torque to "Foot Pounds" on Altivar Process Drives ATV630/930
Product Line:
ATV630, ATV690 series drives.
Environment:
All models with firmware 1.6 or below.
Cause:
Information unavailable in current literature.
Resolution:
Currently, it is not possible to display torque as foot pounds on the ATV630 and ATV930 series drives. This information is current as of firmware release 1.6. An evolution has been created to have this feature added via a future firmware update. There is no ETA for this firmware release.
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.