We noticed an issue related to a component manufactured by one supplier that affects Magelis GTU, Open Box (HMIG5U2) and Magelis iPC, HMIPSO models.
Component phenomenon is:

• "Clock signal” outputs may stop functioning.

if the product may suffer this issue, the unit will show following phenomenon.

• Black screen with inability boot
• USB and/or SD card functionality not working correctly

According the notice from the supplier, the issue may begin to occur around 18 months or more in operation.
We have never seen the phenomena on HMIG5U2, and HMIPSO models so far. The supplier also has not seen the phenomena in the market, even if this component is very common market use.

Product impacted
Magelis GTU:
G5U2 <HMIG5U2> Revision: PV: 02, RL: 02, SV: 2.0 or older
G5UL8A <HMIG5UL8A> Revision: PV: 01, RL: 00, SV: 1.0 or older

Magelis iPC:
HMIPSO <HMIPSOH552D1801> Revision: PV: 03, RL: 04, SV: 3.0 or older
HMIPSO <HMIPSOS552D1801> Revision: PV: 04, RL: 05, SV: 3.0 or older
HMIPSO <HMIPSOC552D1W01> Revision: PV: 03, RL: 05, SV: 2.0 or older
HMIPSO <HMIPSO0552D1001> Revision: PV: 01, RL: 02, SV: 1.0 or older
HMIPSO <HMIPSOH752D1801> Revision: PV: 03, RL: 03, SV: 3.0 or older
HMIPSO <HMIPSOS752D1801> Revision: PV: 04, RL: 04, SV: 3.0 or older
HMIPSO <HMIPSOC752D1W01> Revision: PV: 03, RL: 03, SV: 2.0 or older
HMIPSO <HMIPSO0752D1001> Revision: PV: 01, RL: 01, SV: 1.0 or older


Measures
In case you see the failure on applicable products, please contact to our sales office in your region. We will take appropriate actions and we will support the product under or out of warranty,

Thank you very much for your continuous use of Schneider products.
We strive to deliver high quality product and services that exceed customer expectations.
We are proactively sharing the notice following product quality information about specific revision models of Magelis GTU, Open Box (HMIG5U2) and Magelis iPC, HMIPSO models.
We sincerely apologize for any inconvenience this may cause you.

게시 대상:슈나이더 일렉트릭 Korea