What do the different colors mean on the LED indicator for the Thermal Monitoring solution installed in the Model 6 Motor Control Center
An external single LED status indicator is provided on the unit disconnect mechanism for displaying thermal status conditions.
Solid Green - OK No Alarms No Color / Black - Not Operating / Loss of Power to Device
Solid Yellow - Phase Temperature Imbalance Flashing Yellow - Line / Load Delta Thermal
Flashing Red - High Temperature Solid Red - Sensor Failure Signal Loss
Temperature Alarms are configurable by dip switches.
The Thermal Monitoring solution includes Modbus RS485 serial communications capability. iMCC Network solutions with this feature are available under special order configurations.
For detailed installation and setup information reference the Exertherm instruction bulletin
For pricing and lead time information contact the Technical Assistance Group at the Seneca, SC manufacturing location.
Solid Green - OK No Alarms No Color / Black - Not Operating / Loss of Power to Device
Solid Yellow - Phase Temperature Imbalance Flashing Yellow - Line / Load Delta Thermal
Flashing Red - High Temperature Solid Red - Sensor Failure Signal Loss
Temperature Alarms are configurable by dip switches.
The Thermal Monitoring solution includes Modbus RS485 serial communications capability. iMCC Network solutions with this feature are available under special order configurations.
For detailed installation and setup information reference the Exertherm instruction bulletin
For pricing and lead time information contact the Technical Assistance Group at the Seneca, SC manufacturing location.
게시 대상: 슈나이더 일렉트릭 Korea
도움이 필요하신가요?
제품 선택기
애플리케이션에 적합한 제품과 액세서리를 빠르고 쉽게 찾을 수 있습니다.
견적 받기
영업 관련하여 온라인으로 문의하시면 전문가가 연락드립니다.
구매처
해당 지역의 가장 가까운 슈나이더 일렉트릭 대리점을 쉽게 찾을 수 있습니다.
지원 센터
한 곳에서 모든 요구 사항에 대한 지원 리소스를 찾아보십시오.